background image

5

Warning! Important Safety Information

Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.

Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or
damage parts. Never spill liquid of any kind on the LCD TV.

Ground outdoor antennas. If an outside antenna
or cable system is connected to the LCD TV, be
sure the antenna or cable system is grounded so
as to provide some protection against voltage
surges and built-up static charges. Section 810 of
the National Electrical Code, ANSI/NFPA No.70-
1984, provides information about proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.

Do not attempt to service the LCD TV yourself.
Refer all servicing to qualified service personnel.
Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following
conditions:

- when the power-supply cord or plug is damaged
- if liquid has been spilled on the unit or if objects have fallen into the unit
- if the LCD TV has been exposed to rain or water
- if the LCD TV does not operate normally by following the operating instructions
- if the LCD TV has been dropped or the cabinet has been damaged
- when the LCD TV exhibits a distinct change in performance

If you make adjustments yourself, adjust only those controls that are covered by the operating instructions.
Adjusting other controls may result in damage and will often require extensive work by a qualified technician to
restore the LCD TV to normal.

When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may
result in additional damage to the unit.

Upon completion of any service or repairs to this LCD TV, ask the service technician to perform safety checks to
determine that the LCD TV is in a safe operating condition.

Keep all power adaptors apart.
Possible fire hazard.

Keep the power adaptor away from any other heater.
Possible fire hazard.

Remove and discard the plastic cover from the power adaptor before use.
Possible fire hazard.

Always keep the power adaptor in a well-ventilated area.

ANTENNA
LEAD IN WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING
CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

GROUND CLAMP

ELECTRIC
SERVICE
EQUIPMENT

NEC   NATIONAL ELECTRICAL CODE

EXAMPLE OF ANTENNA GROUNDING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference that may cause undesired operation.

This LCD TV provides display of television closed captioning in accordance with §15.119 of the FCC
rules.

Содержание LTM 245W




































Отзывы: