English-
45
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture
so that it is aligned to the center of the screen.
Preset to
PC
mode by pressing the
SOURCE
button on t
h
e r
e
mote control.
P C D
I S P L AY
2
Press the
ENTER
button to
select “Image Lock”.
4
When you are satisfied with the settings, press the
MENU
button repeatedly to return to normal viewing.
3
Press the
UP/DOWN
buttons to select
“Coarse” or “Fine”,
then press the
ENTER
button.
Press the
LEFT/RIGHT
buttons to adjust the
screen quality, vertical
stripes may appear or
the picture may be
blurry.
<Adjusting Coarse>
<Adjusting Fine>
1
Press the
MENU
button
to display the menu.
Press the
UP/DOWN
buttons to select
“Setup”, then press the
ENTER
button.
Press the
UP/DOWN
buttons to select
“PC”, then press
the
ENTER
button.
BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 45