Samsung LN32B460, Руководство пользователя

Страница: 17 / 89

English -
CHANNEL
Channel Menu
Antenna → Air / Cable
Before your television can begin memorizing the available channels, you must specify the type
of signal source that is connected to the TV (i.e. an Air or a Cable system).
Press the TOOLS button to display the Tools menu. You can also set the Antenna by
selecting Tools → Switch to Cable (or Switch to Air ).
If the antenna is connected to ANT IN (AIR) , select Air and if it is connected to ANT IN
(CABLE) , select Cable .
If both ANT IN (AIR) and ANT IN (CABLE) are connected, select the antenna input
you want.
If the antenna input is not selected properly, noise may appear on the screen.
Auto Program
Air: Air antenna signal. / Cable: Cable antenna signal. / Air+Cable: Air and Cable antenna signals
If the antenna is connected to ANT IN (AIR) , select Air and if it is connected to ANT IN (CABLE) , select Cable .
If both ANT IN (AIR) and ANT IN (CABLE) are connected, select the Air+Cable .
If you want to stop Auto Programming, press the ENTER
E
button. The Stop Auto Program? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press the ENTER
E
button.
Full Guide / Mini Guide
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out
of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information
becomes available.
You can also display the guide menu simply by pressing the GuIDE button. (To configure the Default Guide , refer to the
descriptions.)
Full Guide
Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which
may be scrolled forwards or backwards in time.
Mini Guide
The information of each programme is displayed by each line on the current channel Mini Guide screen from the current
programme onwards according to the programme starting time order.
Default Guide → Mini Guide / Full Guide
You can decide whether to display either the Mini Guide or the Full Guide when the GuIDE button on the remote control is
pressed.
Channel List
For detailed procedures on using the Channel List , refer to the ‘Managing Channels’ instructions. (refer to pages 17~18)
You can select these options by simply pressing the CH LIST button on the remote control.
Fine Tune (analog channels only)
Use fine tuning to manually adjust a particular channel for optimal reception.
If you do not store the fine-tuned channel in memory, adjustments are not saved.
‘*’ will appear next to the name of fine-tuned channels.
To reset the fine tuning setting, press the ▼ button to select Reset , then press the ENTER
E
button.
LNA (Low Noise Amplifier) → On / Off
If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the
incoming signal).
LNA functions only when antenna is set to Air or Cable .
The LNA setting must be made separately for each channel.
If the picture is noisy with the LNA set to
On , select Off .
¦
❑
T
N
N
N
❑
■
N
N
N
❑
O
■
■
❑
❑
O
❑
N
N
N
❑
N
N
N
Antenna : Air ►
Auto Program
Full Guide
Mini Guide
Default Guide
: Full Guide
Channel List
Fine Tune
Channel
BN68-01919B-Eng.indd 15 2009-04-10 �� 9:58:14