English-
Turning the TV On and Off
Press the
POWER
button on the remote control.
You can also use the
POWER
button on the TV.
2
With the power on, press the
MENU
button.
The main menu appears on the screen.
The menu’s left side has icons: Picture, Sound,
Channel, Setup, Input.
Press the ▲ or ▼ button to select one of the icons.
Then press the
ENTER
button to access the
icon’s sub-menu. Press the
EXIT
button to exit.
The on-screen menus disappear from the
screen after about one minute.
➣
Storing Channels in Memory
(Automatic Method)
Press the
MENU
button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then
press the
ENTER
button.
2
Press the ▲ or ▼ button to select “Auto Program”,
then press the
ENTER
button.
3
Press the ▲ or ▼ button to select the antenna
connection, then press the
ENTER
button.
When selecting the Cable TV system:
Press the
ENTER
button to start the auto
program.
Press the ◄ or ► button, then press the ▲ or ▼ to
select the correct analog signal cable system source
among “STD”, “HRC”, and “IRC”.
Press the
ENTER
button.
If you have Digital cable TV, select the cable system
signal source for both Analog and Digital.
Viewing the Menus
The TV begins memorizing all available stations.
After all the available channels are stored, it start to
remove scrambled channels.
Press the
EXIT
button to exit.
To Stop the Auto Program Function
Press the
MENU
button while the Auto Program function is
being executed. You can also press the
ENTER
button
to stop the setup.
Checking to see if Channels were Stored in Memory
Press the
CH
button. Only the channels stored in memory
will be selected (in order).
Selecting the antennas
•
Air
: “Air” antenna signal.
•
Cable
: “Cable” antenna signal.
•
Auto
: “Air” and “Cable” antenna signals.
Move
Enter
Return
Selects the antenna to execute the Auto
Program function.
Auto Program
Move
Enter
Return
TV
Start
Air
Cable
Auto
Start
Start
Move
Enter
Return
Selects a cable signal type for your location.
Auto Program
Move
Enter
Return
TV
Analog
Start
STD
HRC
IRC
Digital
STD
HRC
IRC
Auto Program
Plug & Play
Enter
Return
Auto Program
Auto Program in Progress.
DTV Cable : --
Cable :
Cable 2
%
Stop
Auto Program
Plug & Play
Enter
Return
Auto Program
Removing scrambled channel.
DTV Cable
0 %
Stop
BN68-01516G-00Eng.indd 8
2008-05-26 ¿ÀÈÄ 6:42:45
