background image

4

Electricity and Safety

 Warning

Do not use a damaged power cord or plug, or a loose power socket.

An electric shock or fire may result.

Do not use multiple products with a single power socket.

Overheated power sockets may cause a fire.

Do not touch the power plug with wet hands. Otherwise, an electric shock may result.

Do not bend or pull the power cord with force. Be careful not to leave the power cord 
under a heavy object.

Damage to the cord may result in a fire or electric shock.

Do not place the power cord or product near heat sources.

A fire or electric shock may result.

Insert the power plug all the way in so it is not loose.

An unsecure connection may cause a fire.

Connect the power plug to a grounded power socket (type 1 insulated devices only).

An electric shock or injury may result.

Clean any dust around the pins of the power plug or the power socket with a dry cloth.

A fire may result.

 Caution

Do not disconnect the power cord while the product is being used.

The product may become damaged by an electric shock.

Only use the power cord provided with your product by Samsung. Do not use the power 
cord with other products.

A fire or electric shock may result.

Keep the power socket where the power cord is connected unobstructed.

The power cord must be disconnected to cut off power to the product when an issue 

occurs.

Hold the plug when disconnecting the power cord from the power socket.

An electric shock or fire may result.

Содержание LH008IWRMWS/XU
















Отзывы: