Samsung LE26A466C2W Скачать руководство пользователя

Страница: 7 / 62

English -

What is HDMI?

- “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels

of digital audio.

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The

difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy

Protection) coding feature installed, and supports.

DVI IN(HDMI) [R-AUDIO-L]

- DVI audio outputs for external devices.

Supported modes for HDMI/DVI and Component.

480i

480p

576i

576p

720p

1080i

HDMI/DVI 50Hz

HDMI/DVI 60Hz

Component

AUDIO OUT [R-AUDIO-L]

Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in

connectors on the Amplifier or DVD Home Theatre.

ANT IN

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

SERVICE

LE6A66, LE6A67

Connector for SERVICE only.

LEA66, LEA67, LEA6, LE7A66, LE7A67, LE0A66, LE0A67, LE0A6

Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your

remote control.

COMMON INTERFACE Slot

- When not inserting “CI CARD” in some channels, “Scrambled Signal” is displayed

on the screen.

- The pairing information containing a telephone number, CI CARD ID, Host ID and

other information will be displayed in about 2~3 minutes. If an error message is

displayed, please contact your service provider.

- When the channel information configuration has finished, the message “Updating

Completed” is displayed, indicating that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider. Remove the CI

CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.
Insert the CI-Card in the direction marked on it.
The place of the COMMON INTERFACE Slot may be different depending on its model.

SERVICE

- Connector for SERVICE only.

S-VIDEO or VIDEO / R-AUDIO-L

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

- Connect RCA audio cables to “R-AUDIO-L” on your set and the other ends to corresponding audio out connectors on

the A/V device.

HEADPHONES JACK

- Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound

from the built-in speakers will be disabled.

➣

BN68-01424M-00Eng.indb 5

2008-08-19 �� 2:58:54

Содержание LE26A466C2W































































Результаты поиска

Содержание LE26A466C2W

Отзывы:

Похожие инструкции для LE26A466C2W

Бренды по названию

Популярные бренды

Samsung LE26A466C2W, Руководство пользователя

Результаты поиска

Содержание LE26A466C2W

Отзывы:

Похожие инструкции для LE26A466C2W

Бренды по названию

Популярные бренды