8
An FCC compliant telephone cord
and modular plug is provided with this
equipment. This equipment is designed
to be connected to the telephone network
or promises wiring using a compatible
modular jack which is Part 68 compliant.
See Installation Instructions for details.
The REN is used to determine the
quantity of devices which may be
connected to telephone line. Excessive
RENs on the telephone line may result in
the devices not ringing in response to an
incoming call. In most, but not all areas,
the sum of RENs should not exceed
five (5.0). To be certain of the number of
devices that may be connected to a line,
as determined by total RENs, contact the
local telephone company to determine the
maximum REN for the calling area.
If the terminal equipment causes harm
to the telephone network, the Telephone
Company will notify you in advance that
temporary discontinuance of service may
be required. But if advance notice is not
practical, the telephone company will
notify the customer as soon as possible.
Also, you will be advised of your right
to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make
changes in its facilities, equipment,
operations, or procedures that could
affect the operation of the equipment. If
this happens, the telephone company
will provide advanced notice in order for
you to make necessary modifications to
maintain uninterrupted service.
If trouble is experienced with this
equipment (Modem) for repair or warranty
information, please contact your local
distributor. If the equipment is causing
harm to the telephone network, the
telephone company may request that
you disconnect the equipment until the
problem is resolved.
The user must use the accessories and
cables supplied by the manufacturer
to get optimum performance from the
product.
No repairs may be done by the customer.
This equipment cannot be used on public
coin phone service provided by the
telephone company. Connection to party
line service is subject to state tariffs.
