background image

English - 

SOUND CONTROL

Configuring the Sound Menu

Mode → Standard / Music / Movie / Clear Voice / Custom

You can select a sound mode to suit your personal preferences.

Press the 

TOOLS

 button to display the 

Tools

 menu. You can also configure the sound 

mode by selecting 

Tools → Sound Mode

.

Equalizer

The sound settings can be adjusted to suit your personal preferences.

Mode

You can select a sound mode to suit your personal preferences.

Balance

Controls the balance between the right and left speakers.

00Hz / 00Hz / KHz / KHz / 0KHz (Bandwidth Adjustment)

To adjust the level of different bandwidth frequencies

Reset

Resets the equalizer settings to the default values.

SRS TruSurround HD → Off / On

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two 

speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, 

including internal television speakers. It is fully compatible with all multichannel formats.

Press the SRS button on the remote control to select Off or On.

Audio Language 

(digital channels only)

You can change the default value for audio languages. Displays the language information for the incoming stream.

While viewing a digital channel, this function can be selected.

You can only select the language among the actual languages being broadcast.

Audio Format → MPEG / Dolby Digital / Advanced 

(digital channels only)

When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed 

difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.

While viewing a digital channel, this function can be selected.

The 

Audio Format

 appears according to the broadcasting signal.

¦

T

O

N
N

N
N

Mode 

: Custom  ►

Equalizer
SRS TruSurround HD 

: Off

Audio Language 

: - - -

Audio Format 

: - - -

Audio Description

Auto Volume 

: Off

Sound

BN68-01895A.indb   16

2009-04-10   �� 5:18:05

Содержание LA32B530




































Отзывы: