background image

English - 8

Full Guide / Mini Guide

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out 

of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information 

becomes available.

You can also display the guide menu simply by pressing the 

GUIDE

 button. (To configure the 

Default Guide

, refer to the 

descriptions.)

In New Zealand, If 

Digital Text

 is set to 

Enable

, the EPG (Electronic Program Guide) will work. (refer to page 19)

Full Guide

Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which 

may be scrolled forwards or backwards in time.

Mini Guide

The information of each programme is displayed by each line on the current channel Mini Guide screen from the current 

programme onwards according to the programme starting time order.

Default Guide

 → 

Mini Guide / Full Guide (Australia & Singapore Only)

You can decide whether to display either the 

Mini Guide

 or the 

Full Guide

 when the 

GUIDE

 button on the remote control is 

pressed.

Channel List

For the detailed procedures on using the 

Channel List

, refer to page 9.

You can select these options by simply pressing the 

CH LIST

 button on the remote control.

Channel Mode

When press the 

P

 

>

/

<

 button, Channels will be switched within the selected channel list.

Added Ch.

Channels will be switched within the memorized channel list.

Favourite Ch.

Channels will be switched within the favourite channel list.

Fine Tune

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store 

operation. If the signal is weak or distorted, you may have to fine tune the channel manually.

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the 

channel banner.

To reset the fine-tuning, select 

Reset

 by pressing the ▲ or ▼ button and then press the 

ENTER

E

 button.

Only Analogue TV channels can be fine tuned.

O

N

O

N

N
N

[450_Aus]BN68-02041B-02Eng.indb   8

2009-09-16   �� 11:02:51

Содержание LA22B450
































Отзывы: