Samsung LA19C350, Руководство пользователя

Страница: 18 / 36

17
English
03
Basic Featur
es
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal .
Night
■
: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select
(External speaker / TV speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to
External Speaker
.
When
✎
Speaker Select is set to External Speaker , the
volume and MUTE buttons will not operate and the
sound settings will be limited.
When
✎
Speaker Select is set to External Speaker , you
should use these settings.
TV
x
Speaker: Off , External Speaker: On
When
✎
Speaker Select
is set to
TV Speaker
, you
should use these settings.
TV
x
Speaker: On , External Speaker: On
If there is no video signal, both speakers will be mute.
✎
Additional Setting
DTV Audio Level (MPEG / HE-AAC)
■
: This function
allows you to reduce the disparity of a voice signal
(which is one of the signals received during a digital TV
broadcast) to a desired level.
According to the type of broadcast signal,
✎
MPEG /
HE-AAC can be adjusted between -10dB and 0dB.
To increase or decrease the volume, adjust
✎
between the range 0 and -10 respectively.
SPDIF Output
■
: SPDIF (Sony Philips Digital InterFace) is
used to provide digital sound, reducing interference going to
speakers and various digital devices such as a DVD player.
Audio Format : During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options
PCM or Dolby Digital .
By connecting to 5.1ch speakers in a Dolby Digital
✎
setup, maximize your interactive 3D sound experience.
Audio Delay
: Correct audio-video mismatch, when
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver.
Dolby Digital Comp (Line / RF)
■
: This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
Select
✎
Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.
Line : Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF : Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Setup Menu
Setting the Time
¦
Time
Clock
■
: Setting the clock is for using various timer
features of the TV.
The current time will appear every time you press
O
the INFO button.
If you disconnect the power cord, you have to set
✎
the clock again.
Clock Mode (Auto / Manual)
Depending on the broadcast station and signal,
✎
the auto time set up may not be correct. In this
case, set the time manually.
The antenna must be connected in order to set
✎
the time automatically.
Clock Set : Set the Day, Month, Year, Hour and Minute
manually.
Available only when
✎
Clock Mode is set to Manual .
Time Zone : You can select your time zone.
This feature is only available in Australia.
✎
This function is only available when
✎
Clock Mode
is set to Auto .
Depending on the broadcast station and signal,
✎
the auto time may not be set correctly. If this
occurs, set the time manually.
BN68-02699A-Eng.indb 17 2010-04-06 �� 8:51:21