manualshive.com logo in svg

Samsung KS86C6004, Руководство пользователя

Поделиться
Скачать
Samsung KS86C6004 Скачать руководство пользователя страница 145

UNIVERSAL SERIAL BUS

KS86C6004/C6008/P6008 MICROCONTROLLER (Preliminary Spec)

11-2

Serial Bus Interface Engine (SIE)

The Serial Interface Engine interfaces to the USB serial data and handles, deserialization/serialization of data,
NRZI encoding/decoding, clock extraction, CRC generation and checking, bit stuffing and other specifications
pertaining to the USB protocol such as handling inter packet time out and PID decoding. .

Control Logic

The USB control logic manages data movements between the CPU and the transceiver by manipulating the
transceiver and the endpoint register. This includes both transmit and receive operations on the USB. The logic
contains byte count buffers for transmit operations that load the active transmit endpoint's byte count and use
this to determine the number of bytes to transfer. The same buffer is used for receive transactions to count the
number of bytes received and transfer that number to the receive endpoint's byte count register at the end of the
transaction.

The control logic in KS86C6004/C6008/P6008, when transmitting, manages parallel to serial conversion, packet
generation, CRC generation, NRZI encoding and bit stuffing.

When receiving, the control logic in KS86C6004/C6008/P6008 handles Sync detection, packet decoding, EOP
(end of packet) detection, bit stuffing, NRZI decoding, CRC checking and serial to parallel conversion

Bus Protocol

All bus transactions involve the transmission of packets. KS86C6004/C6008/P6008 supports three packet types;
Token, Data and Handshake. Each transaction starts when the host controller sends a Token Packet to the USB
device. The Token packets are generated by the USB host and decoded by the USB device. A Token Packet
includes the type description, direction of the transaction, USB device address and the endpoint number.

Data and Handshake packets are both decoded and generated by the USB device, pending on the type of
transaction. In any transaction, the data is transferred from the host to a device or from a device to the host. The
transaction source then sends a Data Packet or indicates that it has no data to transfer. The destination then
responds with a Handshake Packet indicating whether the transfer was successful.

Data Transfer Types

USB data transfer occurs between the host software and a specific endpoint on the USB device. An endpoint
supports a specific type of data transfer. The KS86C6004/C6008/P6008 supports two data transfer endpoints:
control and interrupt.

Control transfer configures and assigns an address to the device when detected. Control transfer also supports
status transaction, returning status information from device to host.

Interrupt transfer refers to a small, spontaneous data transfer from USB device to host.

Endpoints

Communication flows between the host software and the endpoints on the USB device. Each endpoint on a
device has an identifier number. In addition to the endpoint number, each endpoint supports a specific transfer
type. KS86C6004/C6008/P6008 supports two endpoints: Endpoint 0 supports control transfer, and Endpoint 1
supports interrupt transfer.

Содержание KS86C6004













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды