background image

5

Installation

 Warning

DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE 
PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.

A fire may result.

Do not install the product in poorly ventilated spaces such as a bookcase or closet.

An increased internal temperature may cause a fire.

Do not install the product on an unstable or vibrating surface (insecure shelf, sloped 
surface, etc.)

 

The product may fall and become damaged and/or cause an injury.

 

Using the product in an area with excess vibration may damage the product or 

cause a fire.

Do not expose the product to direct sunlight, heat, or a hot object such as a stove.

The product lifespan may be reduced or a fire may result.

Do not install the product within the reach of young children.

The product may fall and injure children.

Edible oil, such as soybean oil, can damage or deform the product. Do not install the 
product in a kitchen or near a kitchen counter.
Have a technician install the wall-mount hanger.

 

Installation by an unqualified person can result in an injury.

 

Only use approved cabinets.

Install the product at least 10 cm away from the wall to allow ventilation.

An increased internal temperature may cause a fire. 

Keep the plastic packaging out of the reach of children.

Children may suffocate.

Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, 
etc.), oil, or smoke.

A fire or electric shock may result.

Following installation, it is recommended to dehumidify the LED Signage product before 
use.

 

This helps prevent moisture damage and maintain optimal performance.

 

For product dehumidification, refer to the supplied installation manual.

The installation manual is available for download at www.samsung.com/

displaysolutions.

 Caution

Do not set down the product on its front.

The screen may become damaged.

When installing the product on a cabinet or shelf, make sure that the bottom edge of the 
front of the product is not protruding.

 

The product may fall and become damaged and/or cause an injury.

 

Install the product only on cabinets or shelves of the right size.

Do not drop the product while moving. Product failure or personal injury may result.

Set down the product gently.

Product failure or personal injury may result.

Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical 
substances, extreme temperatures or a significant presence of moisture, or a place 

where the product will operate continuously for an extended period of time) may 
seriously affect its performance.

Be sure to consult Samsung Customer Service Centre if you want to install the 

product at such a place.

Содержание IWA-R Series




















Отзывы: