manualshive.com logo in svg

Samsung ITP-5107SIP, Руководство пользователя

Поделиться
Скачать
Samsung ITP-5107SIP Скачать руководство пользователя страница 30

23

FORWARDING CALLS 

You may forward your calls to another station, group of stations or an external
telephone number. Program a destination for the type of forwarding you want as
detailed below. If you have 

FWD ALL

,

FWD BUSY

and 

FWD NO ANSWER

buttons,

press one to turn that forward feature on. A steady red light reminds you what for-
ward condition is activated.

You can clear all call forward conditions set at your station by lifting the handset
and dialing 

600

.

FORWARD ALL CALLS

To forward all your calls under any condition to another station:

•

Dial 

601

plus the extension or group number.

•

Receive confirmation tone and hang up.

NOTES:
1.

If the Hot Keypad feature has been turned off, you must first lift the handset
or press the 

SPEAKER

button before you begin dialing.

2.

The station that receives a Forwarded All call can transfer the call to the for-
warded station. This is useful when you are expecting an important call but
you do not wish to be disturbed by other calls.

3.

When a station user places his/her keyset in Forward All mode and he/she
does not have a 

FORWARD ALL

button, the 

TRANSFER

button will light to in-

dicate Forward All has been set and calls to this station have been transferred
elsewhere.

FORWARD BUSY

To forward calls to another station when you are on the phone:

•

Dial 

602

plus the extension or group number.

•

Receive confirmation tone and hang up.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press 

SPEAKER

before you begin dialing.

FORWARD NO ANSWER

To forward calls to another station when you do not answer:

•

Dial 

603

plus the extension or group number.

•

Receive confirmation tone and hang up.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the 

SPEAKER

button before you begin dialing.

5107S_keyset.qxp  5/9/2006  9:56 AM  Page 29

Содержание ITP-5107SIP























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды