56_
menu setup
menu setup
• Address type : Select an address type of the camera.
`
Address type can be different dependingon connected product model.
- Static : Used to provide the IP address of the camera manually.
- iPOLiS DDNS : This is available only if the camera is registered with the iPOLiS DDNS(www.samsungipolis.
com) server. Provide the registered domain for DDNS ID.
`
Ex) http://www.samsungipolis.com/snb5000
;
provide "snb5000" for iPOLiS DDNS
- MAC (Samsung) : Available if the camera supports the MAC Address-based DDNS.
- URL : Used for URL address input.
M
`
Refer to the user manual of the connected camera and check the DDNS specification that is supported by the camera.
• IP : Provide the IP address of the camera.
• Device Port : Provide the device port of the camera.
• HTTP Port : Provide the HTTP port of the camera.
• ID : Provide the ID of the camera that you want to register.
• Password : Enter the password of the camera to be registered.
5.
Select <
onvif
> or <
rTSp
> for the protocol and enter your input for each field appears.
• Target Service Address / RTSP URL : Enter the camera’s RTSP access address that supports ONVIF or RTSP.
For more information about the RTSP address, refer to the manual of each applicable network camera.
• ID : Enter the ID for accessing via ONVIF/RTSP protocol.
• Password : Enter the password for accessing via ONVIF/RTSP protocol.
• Mode : Select a mode that is supported by the network camera in RTSP connection mode.
- TCP : The connection type with the network camera will switch to "RTP over TCP".
- UDP : The connection type with the network camera will switch to "RTP over UDP".
- HTTP : The connection type with the network camera will switch to "RTP over TCP (HTTP)".
M
`
For <
ONVIF
> or <
RTSP
> connection, up to 5 cameras of 2M or 3M resolution can be supported.
