- 7 -
ENH-se03.jpg
ENH-se02.jpg
ENH-se06.jpg
•
After
successful
installation,
the
right
window
will
appear.
Click Finish and then the
indicator lamp of camera
will
turn on.
Now you can work with USB
PC
Camera.
4. Connecting the camera with PC [
]
• If you connect the camera with PC before software installation
•
“
Add New Hardware Wizard
”
window
will appear. Click Next to
continue.
• Choose "Search for the best
driver for your device
(Recommended)". Click Next.
! Note
: If you connect the camera with PC before software
installation,
installation
error
may
occur.
Therefore
it
is
recommended that you
should click Cancel during the following •-• stage and
disconnect
the camera with PC, and then install the software first
