Samsung iES4028F, Руководство по управлению

Страница: 645 / 712

Class of Service Commands
4-309
4
Command Mode
Global Configuration
Command Usage
• Strict priority requires all traffic in a higher priority queue to be processed
before lower priority queues are serviced.
• WRR uses a relative weight for each queue which determines the number of
packets the switch transmits every time it services a queue before moving on
to the next queue. Thus, a queue weighted 8 will be allowed to transmit up to
8 packets, after which the next lower priority queue will be serviced according
to it’s weighting. This prevents the head-of-line blocking that can occur with
strict priority queuing.
Example
The following example sets the queue mode to strict priority service mode:
switchport priority default
This command sets a priority for incoming untagged frames. Use the no form to
restore the default value.
Syntax
switchport priority default default-priority-id
no switchport priority default
default-priority-id - The priority number for untagged ingress traffic.
The priority is a number from 0 to 7. Seven is the highest priority.
Default Setting
The priority is not set, and the default value for untagged frames received on
the interface is zero.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• The precedence for priority mapping is IP DSCP, and default switchport
priority.
• The default priority applies for an untagged frame received on a port set to
accept all frame types (i.e, receives both untagged and tagged frames). This
priority does not apply to IEEE 802.1Q VLAN tagged frames. If the incoming
frame is an IEEE 802.1Q VLAN tagged frame, the IEEE 802.1p User Priority
bits will be used.
Console(config)#queue mode strict
Console(config)#