Samsung iDCS500, Руководство пользователя

Страница: 37 / 80

Samsung
i
DCS500 DCS (Euro) Keyset User Guide
– 29 –
4. Dial the telephone number to be stored (18 digits maximum). The number
can include *, # and other special digits (see below).
5. Press the TRSF key to store the number.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER key before you begin dialling.
When programming personal speed dial numbers, some programmable keys
perform special functions (refer to the appropriate keyset layout).
•
On 24B keysets , keys 19–24 are keys ‘A’ to ‘F’.
•
On 12B keysets , keys 7–12 are keys ‘A’ to ‘F’.
•
On 6B keysets , keys 1–3 are keys ‘A’ to ‘C’ and keys 4–6 are keys ‘D’
to ‘F’
Keys ‘B’–‘F’ are used to insert special digits, as follows (the A key is not
used):
B inserts a flash (“F”).
C inserts a pause (“P”).
D is used for pulse-to-tone conversion (“C”). If your system uses rotary (or
pulse) dialling C.O. lines, pressing D while entering a speed dial number
causes all subsequent digits to be sent as DTMF tones.
E is used to hide digits. You may want to hide some phone numbers so that
they will not show in the display when you dial the speed dial number later.
When you are programming the phone number, press E before entering the
digits you want to hide. The symbol “[” is displayed. All subsequent digits will
be displayed as “*” when the speed dial number is dialled. If you want some
digits to display, press E again (“]” is displayed) before entering these digits.
For example , if you program a speed dial number with the phone number 9-
[0121]728765, when you later dial this speed dial number the display shows
****728765.
Note: When programming an outside number, enter the access code (e.g. 9 or 0)
before you press E to hide any digits.
F is used to enter a name for the speed dial number. See Personal Speed
Dial Names in the section “Display Features ”.
Use the
HOLD key to clear a speed dial number and/or name.