ENG - 11
2. Check the standby status after plugging into an electrical outlet
The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink,
press the
ID SET
button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds
until the LINK LED indicator blinks (in Blue).
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
POWER
ID SET
STANDBY
LINK
LINK
Blue blinking
5 Sec
3. Configure “ID SET” using the Soundbar’s remote control
Press and hold the
Up
button on the remote control for at least 5 seconds.
•
The
ID SET
message appears on the display of the Soundbar for a moment, and then it disappears.
•
The Soundbar will automatically power on when
ID SET
is complete.
OU
ND
E
PAIR
5 Sec
ID SET
SAMSUNG logo is on the top
CAUTION
•
If your Soundbar was playing music when it connects to the SWA-8500S, you may hear some
stuttering from the woofer as the connection finalizes.
