ENG - 11
12
TONE CONTROL
By pressing the button, you can adjust the volume of the treble or bass sound. The defired item can be adjusted
using the
Up
/
Down
buttons. This function is enabled in Sound mode excluding in
Standard
mode.
• To control the volume of the treble or bass sound, select “
Treble
” or “
Bass
” in Sound Settings, and then adjust
the volume between -6~+6 by using the
Up
/
Down
buttons.
• Once the bass level is changed, the woofer level will be also adjusted accordingly.
LED indicator
White Blinks X1
“
Treble
” → “
Bass
”
13
Sound Control
By pressing the button, you can set the audio function. The desired item can be adjusted using the
Up
/
Down
buttons. Each time the mode changes, the Multicolour LED blinks in white.
LED indicator
White Blinks X1
“
SpaceFit Sound
” → “
Active Voice Amplifier
” → “
Voice
enhancement
” → “
Night Mode
” → “
Sync
” → “
Virtual
”
•
Voice enhancement
makes it easier to hear spoken dialog in movies and TV.
•
Night Mode
is optimized for night time viewing with the settings adjusted to bring the volume down but keep
the dialog clear.
• Press and hold the
(Sound Control)
button for about 5 seconds to adjust the sound for each frequency band.
150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the
Left
/
Right
buttons and each
can be adjusted to a setting between -6 to +6 using the
Up
/
Down
buttons.
(Make sure the Sound mode is set to “
STANDARD
”.)
• If the video on the TV and audio from the Soundbar are not synchronized, select “
Sync
” in Sound Control, and
then set the audio delay between 0~300 milliseconds by using the
Up
/
Down
buttons.
• “
Sync
” is only supported for some functions.
• The
Virtual
function can be turned
On
/
Off
by using the
Up
/
Down
buttons.
14
USB port (C-type)
for charging
The LED lights while charging. When fully charged, the LED turns off.
• The USB Cable is not provided.
• When the remote control does not work due to low battery, charge it by using the USB-C type port.
Active Voice Amplifier (AVA)
• Analyzes external noise in real time while soundbar is playing, so that voice audio can always be heard clearly.
• No data is saved during the analysis.
Using the Hidden Buttons (Buttons with more than one function)
Hidden Button
Reference page
Remote Control Button
Function
WOOFER (Up)
TV remote control On/Off (Standby)
Up
ID SET
page 9
(Sound Control)
7 Band EQ
page 11
(Source)
Audio Feedback On/Off (Standby)
page 9
