ENG - 8
‒
The menu is activated only when the Surround Speakers are connected.
‒
This mode is automatically turned off and becomes unavailable when the
Q-symphony
function turns on.
• Press and hold the
(Sound Control)
button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz,
2.5kHz, 5kHz, and 10kHz are selectable using the
Left
/
Right
buttons and each can be adjusted to a setting between -6 to +6 using the
Up
/
Down
buttons.
(Make sure the Sound mode is set to “
Standard
”.)
• If the video on the TV and audio from the Soundbar are not synchronized, select
Sync
in Sound Control, and then set the audio delay between
0~300 milliseconds by using the
Up
/
Down
buttons.
•
Sync
is only supported for some functions.
• The
Virtual
Speaker function can be turned
ON
/
OFF
by using the
Up
/
Down
buttons.
Using the Hidden Buttons (Buttons with more than one function)
Hidden Button
Reference page
Remote Control Button
Function
WOOFER (Up)
TV remote control On/Off (Standby)
page 10
Up
ID SET
(Sound Control)
7 Band EQ
(Source)
Voice Feedback On/Off (Standby)
page 6
Output specifications for the different sound effect modes
<HW-Q910D>
Effect
Input
Output
With Subwoofer & Surround Speaker
Standard
2.0 ch
2.1 ch
5.1 ch
5.1 ch / 7.1 ch (DTS)
7.1 ch
7.1 ch
Dolby Atmos®, DTS:X
7.1.2 ch
Surround
2.0 ch
9.1.2 ch
5.1 ch
9.1.2 ch
7.1 ch
9.1.2 ch
Dolby Atmos®, DTS:X
9.1.2 ch
Game Pro
2.0 ch
9.1.2 ch
5.1 ch
9.1.2 ch
7.1 ch
9.1.2 ch
Dolby Atmos®, DTS:X
9.1.2 ch
Adaptive Sound
2.0 ch
9.1.2 ch
5.1 ch
9.1.2 ch
7.1 ch
9.1.2 ch
Dolby Atmos®, DTS:X
9.1.2 ch