
ENG - 7
Play / Pause
You can also play or pause music by pressing the button.
Up/Down/Left/Right
Press the indicated areas to select Up/Down/Left/Right.
Press Up/Down/Left/Right on the button to select or set functions.
• Music Skip
Press the
Right
button to select the next music file. Press the
Left
button to select the previous music file.
• ID SET
Use this option when the Subwoofer or Surround Speakers are not connected or need reconnection.
While powered off, press and hold the
Up
button for 5 seconds to perform
ID SET
. (See page 12.)
Info
Press to display information about the active function or the codec available.
In
BT
mode, it displays the connected device (when pairing is complete) or “
BT ready
” (when pairing is required).
WOOFER LEVEL
Push the button up or down to adjust the level of the woofer (bass).
VOLUME
Push the button up or down to adjust the volume.
• Mute
Press the
VOL
button to mute the sound. Press it again to unmute the sound.
TONE CONTROL
By pressing the button, you can adjust the volume of the treble or bass sound. The defired item can be adjusted
using the
Up
/
Down
buttons. This function is enabled in Sound mode excluding in
Standard
mode.
• To control the volume of the treble or bass sound, select
TREBLE
or
BASS
in Sound Settings, and then adjust the
volume between -6~+6 by using the
Up
/
Down
buttons.
• Once the bass level is changed, the woofer level will be also adjusted accordingly.
Setting the (Sound Control)
•
Active Voice Amplifier (AVA)
: Analyzes external noise in real time while soundbar is playing, so that voice audio can always be heard clearly.
No data is saved during the analysis.
• The
SpaceFit Sound
and
AVA
functions are not supported by
HW-QS730D
model.
•
Voice enhance mode
enhances spoken dialog in movies and TV to make it easier to hear.
•
Night mode
is optimized for night time viewing with the settings adjusted to bring the volume down but keep the dialog clear.
•
Sound Grouping
: The Soundbar main unit and the Surround Speakers play the entire sound instead of surround sound, making it ideal for
large groups of people listening to music in a large space.
‒
This menu is initially activated when the Surround Speakers are connected, and then the menu remains activated regardless of the
connection of the Surround Speakers.
‒
If you enable the Sound Grouping, there are no differences in sounds between the Sound modes.
‒
Sound does not come out from all speaker units of the Soundbar main unit and the Surround speakers, but only from certain
predetermined units, which vary by model.
•
Private Rear Sound
: This mode sets the sound to come out from the Surround Speakers only, allowing you to listen without being disturbed
by others.
‒
If you enable this mode, sound does not come out from the Soundbar main unit and the Subwoofer. Sound only comes out from the front
channel of the Surround Speakers.
‒
If you enable the Private Rear Sound, there are no differences in sounds between the Sound modes.
‒
The function turns off when the power turns off or the Surround Speakers connection is lost.