ENG - 15
CAUTION
• If your Soundbar was playing music when it connects to the SWA-9100, you may hear some stuttering from the woofer as the connection
finalizes.
4. Check if the LINK LED is solid blue (connection complete)
STANDBY
LINK
LINK
Blue is On
The LINK LED indicator stops blinking and glows a solid blue when a connection
is established between the Soundbar and the Wireless Receiver Module.
5. If the SWA-9100 does not connect, take the necessary steps according to the LED Indicator’s status
LED status
Action
LINK (Blue)
On
Connected with the Soundbar
-
Blinking
Connection standby status
Check if the Soundbar is turned on
Repeat steps 3 through 4.
STANDBY (Red)
On
Connection failure
Check if the Soundbar is turned on
1.
Press the
ID SET
button on the back of the Wireless
Receiver Module with a pen tip for 5~6 seconds until the
LINK LED indicator blinks (in Blue).
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
ID SET
5 Sec
2.
Repeat steps 3 through 4.
Others
-
Errors
Contact a Samsung Service Center.
