Samsung HW-N410, Руководство пользователя

Страница: 12 / 127

ENG - 8
If the device fails to connect
• If the previously connected Soundbar listing (e.g. “ [AV] Samsung Soundbar Nxxx N-Series ”)
appears in the list, delete it.
• Press the PAIR button on the remote control or in “ BT ” mode, press and hold the (Source)
button for more than 5 seconds on the right side of the Soundbar to switch to “ BT PAIRING ” mode.
Then, select “ [AV] Samsung Soundbar Nxxx N-Series ” from the TV’s search list.
What is the difference between BT READY and BT PAIRING?
• BT READY : In this mode, you can search for previously connected TVs or connect a previously
connected mobile device to the Soundbar.
• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button
on the remote control or press and hold the (Source) button for more than 5 seconds on the
right side of the Soundbar while in “ BT ” mode.)
NOTES
• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 10 meters.
• The Soundbar automatically turns off after 5 minutes in the Ready state.
• The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
– If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
Disconnecting the Soundbar from the TV
Press the (Source) button on the right side panel or on the remote control and switch to any mode
but “ BT ”.
• Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)
• To cancel the automatic Bluetooth connection between the Soundbar and TV, press the
p
(Play/Pause) button on the remote control for 5 seconds in “ BT READY ” status. (Toggle On → Off)