ENG - 11
Auto Power Link
Auto Power Link automatically turns on the Soundbar when the TV is turned on.
1.
Connect the Soundbar and a TV with a digital optical cable as described in Step 1 on the previous
page.
2.
Press the
Left
button on the remote control (the blue spot in the illustration to
the right) for 5 seconds to turn Auto Power Link on or off.
• Auto Power Link is set to ON by default.
(To turn off this function, press the
Left
button on the remote for 5 seconds.)
• Depending on the connected device, Auto Power Link may not function.
• This function is only available in the “
D.IN
” mode.
Connecting a TV using an HDMI Cable
• The HDMI cable is supplied only for the MM55C.
Right Side of the Soundbar
HDMI IN
(ARC)
HDMI OUT
(TV-ARC)
HDMI IN
HDMI Cable
(not supplied)
Bottom of Soundbar
TV ARC
Connect to the HDMI IN
(ARC) port of your TV.
Connect to the HDMI OUT (TV-ARC)
port of the Soundbar main unit.
1.
With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure.
2.
“
TV ARC
” appears in the display window of the Soundbar main unit and the Soundbar plays TV
sound.
• If TV sound is inaudible, press the
(Source)
button on the remote control or on the right side
of the Soundbar to switch to “
D.IN
” mode. The screen displays “
D.IN
” and “
TV ARC
” in sequence,
and TV sound is played.
