ENG - 23
If the device fails to connect
•
If you have an existing Soundbar (e.g., “
[AV] Samsung Soundbar LST70T
”) in the list of speakers
on the Mobile device, delete it.
•
Repeat steps 1 and 2.
What is the difference between BT READY and BT PAIRING?
•
BT READY
: In this mode, you can reconnect any Samsung TV or mobile device that was
connected before.
•
BT PAIRING
: In this mode, you can connect a new device to the Soundbar. (Press the
PAIR
button on the Soundbar remote control or press and hold the
(Source)
button on the
bottom of the Soundbar for more than 5 seconds while the Soundbar is in “
BT
” mode.)
Notes on Bluetooth connection
•
Locate a new device within 1 m to connect via Bluetooth communication.
•
If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
•
The Soundbar automatically turns off after 18 minutes in the Ready state.
•
The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
–
If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
•
Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
•
The Soundbar supports SBC data (44.1kHz, 48kHz).
•
Connect only to a Bluetooth device that supports the A2DP (AV) function.
•
You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free)
function.
•
When connecting the Soundbar to a Bluetooth device, place them as close to each other as possible.
•
The farther the Soundbar and Bluetooth device are from each other, the lower the sound quality
will become.
The Bluetooth connection may break when the devices are out of the effective range.
•
The Bluetooth connection may not function as intended in areas with poor reception.
