27
ENG
FUNCTIONS
USING THE NETWORK STANDBY ON
FUNCTION
The Network Standby On function becomes available if wireless connection was properly established between the
smart device and Soundbar. This function turns on the Soundbar automatically when a smart device attempts to
connect to the Soundbar via Bluetooth or Wi-Fi. If the Soundbar was turned on via Bluetooth connection, its input
mode is set to
BT
automatically. Turning on the Soundbar via Wi-Fi is available only by using the App. For further
information, refer to the Web manual.
1.
Connect the Smart device to your Soundbar.
2.
Turn the Network Standby On function on by pressing the
$
button on the Soundbar remote for more than 5
seconds. You can turn the function off by pressing the
$
button again for more than 5 seconds.
●
Available only if the Soundbar is listed among the Smart device’s paired devices. (The Smart device and the
Soundbar must have been previously paired at least once.)
●
Soundbar will appear in the Smart device’s searched devices list only when the Soundbar is displaying [BT
READY] or [WiFi READY].
●
In the TV SoundConnect mode, the Soundbar cannot be paired to another Smart device.
●
If Network Standby On function did not work
-
The Network Standby On is set to Off.
●
Wi-Fi connection to the Soundbar will be terminated if its power cord was disconnected or the power was
cut off. Turn on the Soundbar and reconnect.
USING THE MULTIROOM LINK
Once the Soundbar is connected to a smart device with Multiroom App, you can connect multiple Samsung Multiroom
devices together wirelessly.
BEFORE YOU BEGIN
+
Communication Basics
Internet
Wireless Router
Smart Device:
Android or iOS
(App Control)
1.
Requirements: Wireless Router, Smart Device
2.
The wireless router should be connected to the Internet.
3.
The smart device should be connected to the router via a Wi-Fi connection.
HW-J8501_ZK_ENG_0811.indd 27
HW-J8501_ZK_ENG_0811.indd 27
2015-08-11 10:17:08
2015-08-11 10:17:08
