13
12
CONNECTIONS
DETACHING THE WALL MOUNT
1.
Pull the Soundbar upwards as shown in the figure to separate it
from the wall mount.
●
Do not hang onto the installed unit and avoid striking or dropping the unit.
●
Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or
damage the product.
●
When the unit is installed on a wall, please make sure that children do not pull any of the connecting
cables, as it may cause it to fall.
●
For the optimal performance of a wall mount installation, install the speaker system at least 2 inches (5 cm)
below the TV, if the TV is mounted on the wall.
●
For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is unlikely
to fall.
INSTALLING THE BRACKET WITHOUT REFERRING TO THE
WALL-MOUNT INSTALLATION GUIDE
2 inches
(5 cm) or more
2 inches
(5 cm) or more
6.3 inches
(16 cm)
6.9 inches
(17.5 cm)
Minimum 12.9 ~ 13.2 inches
(32.8 ~ 33.5cm)
1.
Place the “Wall Mount L” on the desired wall surface while paralleled to the floor as shown above, and fix a screw
through the hole on its right end.
2.
Place the “Wall Mount R” on the desired wall surface while paralleled to the floor as shown above, and fix a screw
through the hole on its left end.
•
If Wall Mount L/R are to be mounted beneath the TV, check their fixing hole positions in steps 1 and 2, so
that they are aligned appropriately to the center of the TV’s bottom.
3.
Fix screws through the rest of holes.
Using the Soundbar with Wall Mount
[Detaching the Soundbar from the Wall Mount]
HW-J450-ZC ENG-02805B-0111.indd 12
2015/1/21 9:12:20
