Installing the Wall Mount
1.
Place the installation guide against the wall surface.
●
The installation guide must be level.
●
Install at least 2 inches (5 cm) below the TV, if the
TV is mounted on the wall.
c
If the wall is not strong enough to support the unit,
reinforce the wall or install the unit on a different wall
that can support the unit's weight.
c
Purchase and use the fixing screws or anchors
appropriate for the kind of wall you have (plaster
board, iron board, wood, etc.).
c
Purchase wall mounting screws according to the
type and thickness of the wall you will mount the
Soundbar on.
- Diameter : M5
- Length : 1 3/8 inches (35 mm) or longer
recommended.
2 inches
(5 cm) or more
2.
Mark the location where the screws will go through
on the wall using a pen, and then remove the
installation guide.
3.
Fasten the wall mounts and screws to the marked
locations.
●
The left and right mounts are different shapes.
4.
Secure the two holder screws to the screw holes on
the back of the Soundbar's main body, one on the
left and one on the right.
5.
Insert the USB Cable into the back of the Soundbar
before installing it on the wall.
Wall Mounting the Soundbar
6.
Set the holder screws on the back of the Soundbar
into the grooves of the wall mount. For safe
installation, make sure to push the holder screws all
the way to the bottom of the grooves.
02841B-HW-J250-ENG-ZC-QG-20150203.indd 4
2015/3/14 15:08:13
