ENG - 11
SOUND
MODE
WOOFER
TONE
CONTROL
CH LEVEL
CH LEVEL
By pressing the button, you can adjust the volume of the each speaker.
•
Press the button to select
CENTER LEVEL
and then adjust the volume between -6~+6
by using the
Up/Down
buttons.
•
If the Rear Speakers (sold separately) are connected, the setting
REAR LEVEL
is
supported. To adjust the volume of the
REAR LEVEL
between -6 to +6 by using the
Up/
Down
buttons.
SOUND
MODE
WOOFER
TONE
CONTROL
CH LEVEL
Sound Control
By pressing the button, you can set the audio function. The desired settings can be
adjusted using the
Up/Down
buttons.
AUDIO SYNC
NIGHT MODE ON/OFF
VOICE ENHANCE ON/OFF
–
AUDIO SYNC
If the video on the TV and audio from the Soundbar are not synchronized, press the
(Sound Control)
button to select
AUDIO SYNC
and then set the audio delay
between 0~300 milliseconds by using the
Up/Down
buttons. (Not available in “
USB
”
or “
BT
” mode.)
–
NIGHT MODE ON/OFF
This mode is optimized for nighttime viewing with the settings adjusted to bring the
volume down but keep the dialog clear.
–
VOICE ENHANCE ON/OFF
This mode is makes it easier to hear spoken dialog in movies and TV.
•
The
NIGHT MODE
, and
VOICE ENHANCE
audio function can be turned
ON/OFF
by
using the
Up/Down
buttons.
•
Press and hold the
(Sound Control)
button for about 5 seconds to adjust the sound
for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the
Left/Right
buttons and each can be adjusted to a setting between
-6 to +6 using the
Up/Down
buttons. (Make sure the Sound mode is set to “
STANDARD
”.)
SOUND
MODE
WOOFER
TONE
CONTROL
CH LEVEL
Bluetooth
PAIR
Switch the Soundbar to Bluetooth pairing mode.
Press the
PAIR
button and wait for the “
BT PAIRING
” screen to connect to a new
Bluetooth device.
Play / Pause
VOL
WOOFER
SOUND
MODE
PAIR
You can also play or pause music by pressing the button.
