background image

ENG - 4

8. 

Do not install near any heat sources such as 
radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce 

heat.

9. 

Do not defeat the safety purpose of the 
polarized or grounding-type plug.  
A polarized plug has two blades with one 
wider than the other. A grounding type plug 
has two blades and a third grounding prong. 
The wide blade or the third prong are 
provided for your safety. If the provided plug 

does not fit into your outlet, consult an 

electrician for replacement of the obsolete 
outlet.

10. 

Protect the power cord from being walked 
on or pinched particularly at plugs, 
convenience receptacles, and the point 
where they exit from the apparatus.

11. 

Only use attachments/accessories specified 

by the manufacturer.

12. 

Use only with the cart, stand, 
tripod, bracket, or table 

specified by the manufacturer, 

or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart/apparatus combination to 
avoid injury from tip-over.

13. 

Unplug this apparatus during lightning 
storms or when unused for long periods of 
time.

14. 

Refer all servicing to qualified service 

personnel. Servicing is required when the 
apparatus has been damaged in any way, 
such as power-supply cord or plug is 
damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

PRECAUTIONS

1. 

Ensure that the AC power supply in your 

house complies with the power 

requirements listed on the identification 

sticker located on the bottom of your 

product. Install your product horizontally, on 

a suitable base (furniture), with enough 

space around it for ventilation (3~4 inches). 

Make sure the ventilation slots are not 

covered. Do not place the unit on amplifiers 

or other equipment which may become hot. 

This unit is designed for continuous use.  

To fully turn off the unit, disconnect the AC 

plug from the wall outlet. Unplug the unit if 

you intend to leave it unused for a long 

period of time.

2. 

During thunderstorms, disconnect the AC 

plug from the wall outlet. Voltage peaks due 

to lightning could damage the unit.

3. 

Do not expose the unit to direct sunlight or 

other heat sources. This could lead to 

overheating and cause the unit to 

malfunction.

4. 

Protect the product from moisture (i.e. 

vases), and excess heat (e.g. a fireplace) or 

equipment creating strong magnetic or 

electric fields. Unplug the power cable from 

the AC wall socket if the unit malfunctions. 

Your product is not intended for industrial 

use. It is for personal use only. Condensation 

may occur if your product has been stored in 

cold temperatures. If transporting the unit 

during the winter, wait approximately  

2 hours until the unit has reached room 

temperature before using.

5. 

The battery used with this product contains 

chemicals that are harmful to the 

environment. Do not dispose of the battery 

in the general household trash. Do not 

expose the battery to excess heat, direct 

sunlight, or fire. Do not short circuit, 

disassemble, or overheat the battery.  

CUATION : 

Danger of explosion if the battery 

is replaced incorrectly. Replace only with the 

same or equivalent type.

Содержание HW-B47M











































Отзывы: