background image

ENG - 15

Adjusting the Soundbar volume with a TV remote control

Adjust the Soundbar volume using the TV’s remote control.

 

This function can be used with IR remote controls only. Bluetooth remote controls (remote 
controls that require pairing) are not supported.

 

Set the TV speaker to 

External Speaker

 to use this function.

 

Manufacturers supporting this function: 
VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA

1. 

Turn Off the Soundbar.

2. 

Push up and hold the 

WOOFER

 button for 5 seconds. 

Each time you push the 

WOOFER

 button up and hold it for 5 seconds, the mode switches in the 

following order: “

SAMSUNG-TV REMOTE

” (Default mode), “

OFF-TV REMOTE

”, “

ALL-TV REMOTE

”.

Remote Control Button

Display

Status

SOU

ND

MO

DE

VOL

WOOFE

R

SOUNDB

AR

5 Sec

SAMSUNG-TV REMOTE

(Default mode)

Enable a Samsung TV’s IR remote 

control.

SOU

ND

MO

DE

VOL

WOOFE

R

SOUNDB

AR

5 Sec

OFF-TV REMOTE

Disable the TV remote control.

SOU

ND

MO

DE

VOL

WOOFE

R

SOUNDB

AR

5 Sec

ALL-TV REMOTE

Enable a third-party TV’s IR remote 

control.

Содержание HW-950T

















































Отзывы: