|
12
English
Connections
FM ANT
DIGITAL
AUDIO IN
OPTICAL
SURROUND
SUBWOOFER
SURROUND
SPEAKERS OUT
HDMI OUT
AUX IN 2
VIDEO
OUT
FA NET
(Only For Service)
VOLTAGE
SEL
.
115
Front Speaker (R)
Subwoofer
Surround Speaker (R)
Surround Speaker (L)
Center Speaker
Front Speaker (L)
Installing the Speakers on the Tallboy Stand
1.
Turn the Stand Base upside-down and connect it to the Stand.
2.
Insert three screws (5*15, For connecting Stand & Stand Base)
clockwise into the three holes marked using a screwdriver as shown in
the illustration.
!
CAUTION :
When you use a torque screwdriver, be careful not to
put excessive force. Otherwise, it runs idle or can be damaged.
(torque screwdriver- below 15 kg.f.cm)
3.
Straighten a supplied speaker wire and put in the hole on the center of
Stand Base.
4.
Connect the upper Speaker to the assembled Stand.
5.
Insert another large screw (5*15, For connecting Speaker & Stand)
clockwise into the hole on the rear of the speaker using a
screwdriver.
6.
This is the appearance after the speaker is installed. Follow this
steps to install other speaker.
5
3
2
6
1
4
Stand Base
Stand
Speaker
Stand
HT-F456K-ENG MIC-04-15.indd 12
HT-F456K-ENG MIC-04-15.indd 12
2013-5-7 15:33:20
2013-5-7 15:33:20