|
12
English
Connections
Installing the Speakers on the Tallboy Stand
* HT-F453K only - Front Speakers
* HT-F445K/F455K only - Front/Surround Speakers
1 .
Turn the Stand Base upside-down and connect it to the
Stand.
2 .
Use the driver to combine the screws on the 3 marked holes.
| CAUTION |
When you use a torque screwdriver, be careful not to put
excessive force. Otherwise, it runs idle or can be damaged.
(torque screwdriver- below 15 kg.f.cm)
3 .
Straighten a supplied speaker wire to the gravity direction
and put in the hole on the center of Stand Base.
4 .
Connect the upper Speaker to the assembled Stand.
5 .
Insert a screw clockwise into the hole on the rear of the
speaker using a screwdriver. And then connect a speaker
cable.
6 .
This is the appearance after the speaker is installed.Follow
this steps to install other speaker.
2
4
1
3
5
6
Stand Base
Stand
Speaker
Stand
In case of HT-F450K
FM ANT
DIGITAL
AUDIO IN
OPTICAL
SURROUND
SUBWOOFER
SURROUND
SPEAKERS OUT
HDMI OUT
AUX IN 2
VIDEO
OUT
FA NET
(Only For Service)
VOLTAGE
SEL
．
115
Front Speaker (R)
Subwoofer
Surround Speaker (R)
Surround Speaker (L)
Center Speaker
Front Speaker (L)
Refer to page 11 for the speakers of
HT-F453K/F453HK/F445K/F455K.
HT-F450-ENG MIC-12-12.indd 12
HT-F450-ENG MIC-12-12.indd 12
2013-2-18 13:53:11
2013-2-18 13:53:11
