English
61
04
Basic Functions
How to Link the Wireless Transmitter
with the Main Unit
Turn off your Home Cinema.
Press the
4
,
7
,
6
,
3
buttons on the remote
control in order.
The Power LED blinks once.
Connect the iPod/iPhone to the Wireless
transmitter.
STAND
BY
LIN
K
CHA
RGE
Turn on the iPod/iPhone. Press the "
ID SET
"
button on the back of the Wireless
transmitter for 5 seconds. The link light on
the wireless transmitter blinks rapidly.
Turn on your product.
To listen to music from iPod/iPhone over the
product, press the
button to select
"
W. IPOD
" mode.
After you select "
W. IPOD
" mode, turn the
volume of the product down to avoid hearing
damage.
You can control the speaker volume of iPod/
iPhone with a volume wheel or a volume bar.
When iPod/iPhone is stopped or in a power
saving mode, the Wireless transmitter enters
Sleep Mode.
When iPod/iPhone is set to Deep Sleep
Mode, the Wireless transmitter turns off.
1.
2.
•
3.
4.
5.
•
•
•
•
Operation status of the wireless
transmitter's LED
CH
ARG
E
STANDB
Y
LIN
K
STANDB
Y
LINK
Display
Function
LINK
(Blue LED)
STANDBY
(Red LED)
LED ON
Pairing
successfully
completed
STANDBY
LED BLINK
(Long blink)
Processing iPod/
iPhone
LOW BATTERY
LED BLINK
(Short blink)
Processing
pairing
Pairing failed
CAUTION
If you use the main unit near a wireless device
such as a laptop computer, an AP, or Wifi , an
unstable operation error can occur.
Do not pair the SWA-5000 and iPod/iPhone at
the same time. If you pair them at the same
time, the iPod/iPhone and SWA-5000 may not
connect to the product.
The transmission distance from the product to
the wireless transmitter is about 5 meters, but
may vary depending on your operation
environment.
The audio signal may be weakened or even
lost where there is an obstacle such as a wall
or partition between the product and wireless
transmitter. You can also weaken or lose signal
if you move the wireless transmitter around.
!
HT-D6759W_ZG_0323.indd 61
HT-D6759W_ZG_0323.indd 61
2011-03-23 10:03:41
2011-03-23 10:03:41