English
23
02
Connections
Connecting Audio from External Components
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital
component.
Press the
FUNCTION
button to select
D. IN
input.
The mode switches as follows :
BD/DVD
D. IN
AUX
R. IPOD
W. IPOD
FM
NOTE
To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.
This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.
AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR.
Connect AUX IN (Audio) on the product to the Audio Out of the external analogue component.
Be sure to match connector colours.
Press the
FUNCTION
button to select
AUX
input.
The mode switches as follows :
BD/DVD
D. IN
AUX
R. IPOD
W. IPOD
FM
NOTE
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of
the VCR to this product.
1.
2.
•
✎
1.
•
2.
•
✎
OPTICAL
HDMI OUT
DIGITAL
AUDIO IN
COMPONENT OUT
FM ANT
WIRELESS
VIDEO OUT
AUX IN
COMPONENT OUT
FM ANT
WIRELESS
VIDEO OUT
HDMI OUT
Optical Cable
(not supplied)
Audio Cable
(not supplied)
If the external analogue
component has only one
Audio Out, connect either
left or right.
Set-Top Box
VCR
White
Red
OPTICAL
AUX
HT-D5100_ELS_1224.indd 23
HT-D5100_ELS_1224.indd 23
2011-12-24 10:03:33
2011-12-24 10:03:33