English
65
04
Basic Functions
Listening to Radio
Using buttons on the Remote Control
Press the
FUNCTION
button to select
TUNER
.
Tune in to the desired station.
Automatic Tuning 1
: When you press the
#
$
button, you select a preset broadcast station.
Automatic Tuning 2
: Press and hold the
TUNING/CH
(
) button to automatically
search for active broadcasting stations.
Manual Tuning
: Press the
TUNING/CH
(
) button to increase or decrease the
frequency incrementally.
Setting Mono/Stereo
Press the
MO/ST
button.
Each time you press the button, the
sound switches between
STEREO
and
MONO
.
In a poor reception area, select
MONO
for a clear, interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory
Press the
FUNCTION
button to select
TUNER
.
Press the
TUNING/CH
(
) button to select
<89.10>.
Press the
TUNER MEMORY
button.
NUMBER fl ashes on the display.
Press the
# $
button to select
a preset number.
You can select between 1 and 15
presets.
Press the
TUNER MEMORY
button again.
Press the
TUNER MEMORY
button before
NUMBER disappears from the display.
NUMBER disappears from the display and
the station is stored in memory.
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the
# $
button on the remote control to select a channel.
1.
2.
•
•
•
•
•
1.
2.
3.
•
4.
•
5.
•
•
6.
•
Use iPod/iPhone with a Wireless Dock
Cradle for iPod/iPhone
You can enjoy fi ner quality music through the
speakers by transmitting an iPod/iPhone’s audio
signal using a Wireless Transmitter.
The Wireless Transmitter's linking ID is preset at
the factory and the main unit and Wireless
Transmitter should link (connect wirelessly)
automatically when the main unit is turned on. If
the link indicator does not light when you turn on
the main unit and Wireless Transmitter, you must
set the ID manually. (See page 66)
Turn on the main unit and connect the iPod/
iPhone to the Wireless transmitter.
Then, press the
FUNC.
button on the product to
select "
iPod
" mode.
The
FUNC.
mode of the main unit switches as
follows:
BD/DVD
D.IN
AUX
iPod
HDMI 1
HDMI 2
TUNER
( See page 16)
How to charge the Wireless Transmitter
STAN
DBY
LINK
CHARGE
CH
ARG
E
STANDB
Y
Connect the Wireless Transmitter to the
Charging Cradle.
Connect the DC power adaptor to a wall
socket.
The charging indicator lights and charging
starts. After the battery is fully charged, the
charging indicator turns Green.
Operation status of the charging cradle's LED
Display
Function
GREEN LED ON
Power on /Charging
completed
RED LED ON
Charging.
1.
2.
•
HT-C9950W_XAA_0820.indd 65
HT-C9950W_XAA_0820.indd 65
2010-08-20 3:47:31
2010-08-20 3:47:31