background image

13

ENG

CONNECTIONS

MAIN UNIT

AV-R720

FRONT SPEAKER

PS-AF720S

CENTER SPEAKER

PS-AC720S

SURROUND SPEAKER

PS-AR720S

ACTIVE SUBWOOFER

PS-AW720S

SYSTEM MODEL NAME : HT-AS720S

√ 

CONNECTING SPEAKER WIRE

SURROUND (R)

PS-AR720S

SURROUND (L)

PS-AR720S

SURROUND 

BACK (R)

SURROUND 

BACK (R)

(Not supplied)

MAIN UNIT

AV-R720

CENTER 

PS-AC720S

• Never touch speaker terminals while the power is on. 

Doing so could result in electric shock.

• Make sure the polarities (+ and -) are correct.
• This system is capable of reproducing 6.1/7.1

channel sound, however only 5.1 speakers are
supplied. 

• Keep the subwoofer speaker out of reach of children to

prevent them from inserting their hands or objects
into the duct (hole).

Caution

FRONT (L)

PS-AF720S

FRONT (R)

PS-AF720S

ACTIVE SUBWOOFER

(BUILT-IN POWER AMPLIFIER)

PS-AW720S

1

. Loosen the knob by turning counterclockwise.

2

. Insert the bare part of the wire into the hole in the side of each terminal.

3

. Tighten the knob by turning clockwise to secure the wire.

√ 

Connecting the Speakers

1

. Press down the terminal tab on the back of the speaker. 

2

. Insert the black wire into the black terminal (–) and the red wire

into the red (+) terminal, and then release the tab.

3

. Connect the connecting plugs to the back of the Home Theater.

• Make sure the colors of the speaker terminals match the colors

of the connecting plugs.

1

2

Black

Red

HT-AS720S-XAA-ENG  2007.8.21  6:8 PM  Page 13

Содержание HT-AS720





















































Отзывы: