23
22
Press
SETUP
button.
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press
FUNCTION
button 1 time.
•
“SPK SETUP” appears in the display.
Press
SURROUND
button to select the speaker you
want.
•
Each time you press this button, F.SPK
➝
C.SPK
➝
S.SPK
➝
SW SPK
➝
CROVR will be selected in turn.
Press
SELECT
( ) button to set the mode for the
selected speaker.
Repeat steps 3-4 to adjust each speaker.
To Exit Setup Mode
•
Wait for about 5 seconds or press
SETUP
button.
“SETUP MODE OFF” appears on the display and exits Setup Mode.
•
LARGE
:
Select when using large speakers. You can listen to full
range sound.
•
SMALL
:
Select this when using small speakers.
Bass below 100Hz will not be output.
•
NONE
:
Select this when you use no speaker.
•
YES(Subwoofer)
:
Select this when using the Subwoofer
Speaker.
•
NO(Subwoofer)
:
Select when not using the Subwoofer
Speaker.
•
CROVR
:
Select the crossover frequency for the best bass
response in your room.
Setting the Speaker
MAIN UNIT
1
2
4
5
3
,
OPERA
TION
Setting the Speaker Mode
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Frequency response from the speaker will be adjusted according to your speaker configuration and whether certain
speakers are used or not.
Press
SPK SELECT
button to select the speaker you want.
•
Each time you press this button, F.SPK
➝
C.SPK
➝
S.SPK
➝
SW SPK
➝
CROVR
➝
SPK MODE OFF will be selected in turn.
Press
…†
button to set the mode (Large, Small etc.) for the
selected speaker.
Repeat steps 1-2 to set the mode for each speaker.
To Exit Setup Mode
•
Wait for about 5 seconds or press the
SPK SELECT
button of the remote control to
select SPK MODE OFF.
To turn the SUBWOOFER On or Off.
Press
SUBWOOFER
button on the remote.
•
Each time you press this button, SW SPK : YES, SW SPK : NO will be selected in turn.
√
1
2
3
REMOTE CONTROL
SPEAKER
F.SPK(Front)
C.SPK(Center)
S.SPK(Surround)
SW SPK(Subwoofer)
CROVR
(Crossover Frequency)
Possible Settings
LARGE,SMALL
LARGE,SMALL,NONE
LARGE,SMALL,NONE
YES,NO
60,80,100,120,
150,180,200(Hz)
Default Setting
SMALL
SMALL
SMALL
YES
150Hz
•
If F.SPK is set to LARGE, you can select YES or NO for SW SPK.
•
If F. SPK is set to SMALL,SW SPK is automatically set to YES. NO cannot be
selected.
