manualshive.com logo in svg

Samsung HT-AS1, Инструкция по эксплуатации, Страница: 25 / 26

Поделиться
Скачать
Samsung HT-AS1 Скачать руководство пользователя страница 25

49

GB

48

MISCELLANENOUS

Before Calling for Service

Symptom

Check Remedy

Can't turn it on.

It does not work when the

button is pressed.

Sound is not produced.

Picture does not appear when

the function is selected.

•

Is the power cord plugged into the outlet?

•

Is there static electricity in the air?

•

Are the speakers and external

components connected properly?

•

Is the Mute function on?

•

Is the volume set to minimum?

•

Is the speaker setup set incorrectly to

NONE?

•

Aren't you playing MPEG II audio in

an external device?

•

Is the external component connected

properly?

•

Connect the power plug to the outlet.

•

Disconnect the power plug and connect it 

again.

•

Connect them correctly.

•

Connect them correctly.

•

Press Mute button to cancel the function.

•

Adjust the volume.

•

Refer to pages 18~19 to select LARGE,

SMALL or YES.

•

MPEG II audio decoding is not supported.

Set the audio format of the external device
to PCM.

There is no sound from

centre speaker 

•

Is the centre speaker connected properly?

•

Is CEN (centre) incorrectly selected to

NONE in speaker setup?

•

Is the surround mode selected to stereo?

•

Refer to pages 10~11 to connect it properly.

•

Refer to pages 

18~19 

to select LARGE or

SMALL.

•

Refer to pages 32~41 to select other

Surround Modes.

Remote controller does

not work.

There is no sound from

surround speakers.

The sound from each
device is changed during
stereo playback.

•

Are the batteries drained?

•

Is the distance between remote

control and main unit too great?

•

Is the surround speaker connected

properly?

•

Is  SURR (surround) incorrectly set to

NONE in speaker setup?

•

Is surround mode selected to stereo?

•

Refer to pages 10~11 to connect it properly.

•

Refer to pages

18~19

to select LARGE or

SMALL.

•

Refer to pages 32~41 to select other

Surround Mode.

•

Replace with new batteries.

•

Operate at close distance.

•

Are the left/right speaker or left/right

input/output cables connected
properly?

•

Check the left/right channel and connect

it/them correctly.

•

If PROTECTION appears on the display,
check whether the speaker terminal is shorted
and then turn on the unit

Product protection function 

Heat protection

•

The protection function will come on if the main unit or power

transformer overheats.
"

" will appear in the display .

This function will come on :
- If speaker terminal is shorted 
- If speaker cable is shorted 
- If there is no problem when you turn the unit on again after

turning it off, PROTECTION mark will disappear on the
display and the unit will work properly.

Symptom

Check Remedy

Can't select Dolby Pro

Logic ll mode.

• 

Is the input signal selected properly?

•

Select 2 channel Dolby Digital, PCM, and

Analogue input signal.

There is no sound when
playing a DTS encoded
DVD.

• 

Is Digital input selected?

•

Check whether digital external component

is properly connected and refer to page

22~23

to select the digital input.

Содержание HT-AS1



























Отзывы:

Нет отзывов