40
Admin Password Buttons
•
Apply
: Select to save changes.
•
Reset
: Select to discard changes made.
Power Management
Once enabled, the HotSpot will disconnect from the data
network after a designated amount of time is reached.
To save on battery life, the built-in wireless radio is turned off
if the HotSpot is idle for the time duration specified in the
Hibernate field.
When the LCD is on and the device is in Hibernate
mode, press the
WPS
key to exit the Hibernate mode.
– or –
If the LCD is off and the device is in Hibernate mode,
then pressing
(
Power
) will turn the LCD on and
turn Hibernate mode off and enable the radios.
•
Hibernate
: Enables/disables the Standby feature. Select the
adjacent filed to determine the amount of time that must be met
before standby time is activated. Choose from: 15 minutes,
30 minutes, 1 hour, 3 hours, or 6 hours.
•
If the device does go into Hibernte mode, confirm the
Hibernate
On
icon (
) appears and press the WPS key to exit the mode.
Power Management Buttons
•
Apply
: Select to update the settings and apply them.
•
Reset
: Select to revert the settings to their previous values.
Umounting SD Card
This process allows you to safely remove the card without
damaging any of the contents. A card must be properly
Unmounted before removal.
Caution!
If a card is pulled out of its internal slot without being
first properly unmounted, it can corrupt or damage
the card’s data.
•
Unmount
: Properly disconnects the card from the device and
allows you to safely remove it.
Format SD Card
This process allows you to quickly erase all data found within
an optional microSD card.
•
Format
: Quickly formats and erases all data currently on the SD
card.
