English _
125
Symptom
Explanation/Solution
When recording a subject illuminated by
bright light, a vertical line appears.
• This is not a malfunction.
When the screen is exposed to direct
sunlight during recording, the screen
becomes red or black for an instant.
• This is not a malfunction.
During recording, the date/time does not
display.
•
“Date/Time Display”
is set to
“Off
.
”
Set the
“Date/Time Display”
to On.
page 85
You cannot record a photo image.
• Set your HD camcorder to Record mode.
page 20
• Release the lock on the write-protection tab of the memory card if any.
• The storage media is full. Use a new memory card or format the storage media.
page 82
Or remove unnecessary images.
page 100
The shutter sound is not heard when you
record a photo image.
• Set
“Shutter Sound”
to
“On.”
The beep sound is not heard.
• Set
“
Beep Sound
” to “
On.
”
• Beep sound is temporally off while recording movies.
There is a time difference between
the point where you press
Recording
start/stop
button and the point where the
recorded movie starts/stops.
• On your camcorder, there may be a slight time delay between the point when you
press
Recording start/stop
button and the actual point where the recorded movie
starts/stops. This is not an error.
troubleshooting
