20
English
Connecting a Pillow Speaker
You can connect a pillow speaker to the TV in the hospital using a jumper cable. The speaker functions as a remote control
and speaker.
TV Rear Panel
Jumper Cable
Pillow Speaker
1.
Connect the pillow speaker jumper cable (cable sold separately) from the television's
PILLOW SPEAKER
Port to the
pillow speaker jack on the wall behind the television.
Pillow Speaker Jack Specifications
y
Output jack: RCA type
y
Input jumper pin: 1/8" 3-conductor stereo phone pin.
y
Signal specifications: Tip-Audio, Ring-Data/Channel change, Sleeve-Common
Tip
Ring
Sleeve
VOL +
VOL -
1
2
3
How to Use the Pillow Speaker
✎
To use Pillow Speaker
, be sure to set the
Pillow Speaker Mode item to on in the Hospital mode setup menu.
y
Analog type speaker: The pillow speaker has one key.
–
Power On: press the key when the TV is in standby mode.
–
Channel Up: press the key when the speaker is on.
–
Power Off: press and hold the key for more than 3 seconds when the speaker is on.
–
An Analog type speaker always works regardless of the Pillow Speaker Type value set in the Hospital mode
setup menu.
y
Digital type speaker: The TV supports the Samsung, Philips, or Zenith code.
–
This speaker is only compatible with a specified IR code. You can change the code in the Hospital mode setup
menu.
–
The TV gives priority to the Samsung remote control over the pillow speaker's wired remote control.
–
Option: Channel Menu Display.
Pillow Sound Control
Speaker Selection Menu
TV Speaker
Pillow Speaker
TV Speaker
Sound
Sound
External Speaker
No Sound
Sound
