Samsung HG43Q60A, Инструкция по установке

Страница: 25 / 59

Connecting the Bathroom Speakers
You can connect the Bathroom Speakers using the following method.
Connecting through the Variable Output (available without an external amplifier)
VOL+
VOL-
TV Rear Panel
Volume Control Box
Speaker
2
1
• The rear panel may differ depending on the model.
1
Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel.
S
Speaker -
N/C
2
Connect the VOL-CTRL port of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.
– The maximum speaker output is 4 W, 8 Ω.
– The VARIABLE AUDIO OUT port supports MONO sound out only.
• Installing the Volume Control Box
– If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom
speakers.
– The port that connects the Volume Control Box to the TV is a 3.5 mm normal Phone jack.
– Volume Control Box switch is a Tact switch.
• Setting the Sub AMP Mode
– 0 : Turns the Sub AMP function off (PWM off).
– 1 : Determines the Sub volume according to the TV speaker sound volume. The TV speaker sound and VARIABLE
AUDIO OUT volume are determined according to the Power On Volume Num , the Min Volume , and the Max
Volume values in the Hotel Option menu.
– 2 : Determines the volume according to the Volume Control Box setting.
• VOL-CTRL Port Specifications
– Speaker Wire : Use speaker cable no more than 82 feet (25 m) in length.
Volume Control Box
VOL - DOWN (White
1
)
VOL +
VOL -
1
2
3
GND (Shield Wire
3
)
VOL - UP (Black /Red
2
)
English - 25