Setting Auto Initialise
Hotel Option
(
MUTE
>
1
>
1
>
9
>
Select
E
) >
Cloning
>
Setting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings:
Picture
,
Sound
,
Channel
, and
Hotel Option
menu. This lets you set nearly all of the menu values on your hospitality TVs
to the same, standard settings. If you allow guests access to the guest side menus, for example the
Picture
menu, they
can change the settings in those menus so they are no longer standard. If you set the
Setting Auto Initialize
function
to on the TV automatically restores (initialises) any guest-side menu values to the cloned, standard values when the TV
is turned off and then turned on again. Note that
Setting Auto Initialize
works on cloned guest side menu values only.
Settings which have not been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the
Setting Auto Initialize
function to on.
•
The menu items may not be supported depending on the models.
Menu Item
Picture
Picture Mode
Picture Size Settings
Picture Size
Fit to screen
Zoom and Position
Expert Settings
Backlight
Brightness
Contrast
Sharpness
Colour
Tint (G/R)
Apply Picture Settings
Digital Clean View
Auto Motion Plus
Settings
Auto Motion Plus
Judder Reduction
LED Clear Motion
Contrast Enhancer
HDR+ Mode
Film Mode
Colour Tone
English - 44
