background image

To register this product please visit 

www.samsung.com/register.

Quick Setup Guide

List of Parts

1

2

3

4

Remote Control (AA59-00817A) & 

 Batteries (AAA x 2)

Power Cord

Owner’s Instructions 

Safety Guide

Wall Mount Adapter 

(Depending on the model)

Holder-Wire stand (32”)

Installing the LED TV Stand

Components

When installing the stand, use the provided components and parts.

 

HG32NE460

A

X 8 (M4 X L14)

• Stand

• Guide Stand 

• Screws

C

X4 (M4 X L12)

B

A

DO NOT USE 

GREASE

Attention

DO NOT USE 

CHEMICALS

DO NOT USE 

OIL

 

Place a soft cloth over the table to protect the TV, and 

then place the TV on the cloth screen-side down.

 

Insert the Stand Guide into the slot on the bottom of 

the TV.

 

Slide and assemble it to the end line in the direction 

of arrow.

1

2

3

C

X4 (M4 X L14)

 

Tight the bottom of the screw first, and stow the upper side of screw last.

 

Progress the assembly of screw in the manual’s order.

Wall Mount Kit Specifications (VESA)

TV

Wall mount 

Bracket

Before installing any other wall mounting kit, assemble the wall mount adapter provided separately with the TV.
Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building materials other 

than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe personal 

injury.

 

Standard dimensions for wall mount kits are shown in the table below.

 

Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.

 

Do not use screws that do not comply with the VESA standard screw specifications.

 

Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. 

Screws that are too long may cause damage to the inside of the TV set.

 

For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ 

depending on the wall mount specifications.

 

Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. 

Samsung is not liable for these kinds of accidents.

 

Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the 

consumer fails to follow the product installation instructions.

 

Do not mount the TV at more than a 15 degree tilt.

 

Always have two people mount the TV onto a wall.

Product Family

TV size in

inches

VESA screw hole

specs (A * B) in

millimeters

Standard Screw

Quantity

LED-TV

32-40

200 × 200

M8

4

Do not install your Wall Mount Kit while your TV is turned on. This may result in personal injury due to electric shock. 

License

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are 

trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the 

Symbol, DTS in combination with the Symbol, DTS Premium Sound|5.1, DTS Digital Surround, DTS 

Express, and DTS Neo2:5 are registered trademarks or trademarks of DTS, Inc. in the United States 

and/or other countries.

 DTS, Inc. All Rights Reserved.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing 

Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS Studio Sound are registered 

trademarks or trademarks of DTS, Inc. in the United States and/or other countries. 

 DTS, Inc. All 

Rights Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks 

or registered trademarks of HDMI Licensing LLC in the United States and other countries.

This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration 

code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under 

license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 8,656,183; 8,731,369; RE45,052.

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source License Notice is written only English.

Dimensions

HG32NE460

1

2

5

4

3

6

7

9

8

(unit: mm)

1

2

3

4

5

6

7

8

9

745.4

699.7

394.3

433.9

442.2

484.2

57.9

163.4

69.0

HG40NE460

7

9

8

1

2

5

4

3

6

(unit: mm)

1

2

3

4

5

6

7

8

9

922.7

880.1

802.2

487.4

530.7

555.1

40.5 

72.0 

170.3

Specifications

Environmental onsiderations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing

Model Name

HG32NE460S

HG40NE460S

Display Resolution

1366 x 768

1920 x 1080

Screen Size
(Diagonal)

32” Class

(31.5” measured diagonally)

40” Class

(39.5” measured diagonally)

Sound (Output)

5W x 2

10W x 2

Dimensions (WxDxH)
Body
With stand

745.4 x 69.0 x 442.2 mm

745.4 x 163.4 x 484.2 mm

922.7 x 72.0 x 530.7 mm
922.7 x 170.3 x 555.1 mm

Weight
Without Stand
With Stand

4.0 kg
4.4 kg

6.7 kg
6.9 kg

 

Design and specifications are subject to change without prior notice.

 

This device is a Class B digital apparatus.

WARNING

:

This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.

Hotel Plug & Play

The Hospital Plug & Play function, which automatically performs the Hospital Mode selection, Country Setup, Clock Setup, and 

Picture Mode Setup, runs once when power is first turned ON. Setup also runs automatically after you have executed a Service 

Reset.

 

◆ Region Settings

 

– Initially highlighted: US 

you can select  the region you want and next

 

TV Basic Setup

 

– Initially highlighted: TV Basic Setup 

Start basic setup to use your TV

 

– If you select the Cloning Mode 

Clone system settings from a USB flash drive or server 

to your TV. Make sure that a USB flash drive is connected 

before you attempt to clone system settings from it.

 

– If you select Factory Menu 

End setup and go directly to the factory you should 

power off and on to start the TV.

 

– If you select commercial TV Mode 

Start basic setup to use your TV in a commercial 

business.

 

Select your Language OSD

 

– Initially highlighted: Español

 

– Display time: OSD time out and operation are the same 

as Samsung’s consumer TV models. 

 

– If you press the Enter key, the “Configure your TV” OSD 

appears.

 

Configure your TV OSD 

 

– Initially highlighted: Standard. 

 

– The TV displays the Picture Mode OSD where you can 

choose Dynamic or Standard Picture mode.

 

◆ Auto Program Mode OSD 

 

– If you press the Enter key, the TV automatically searches 

for channels.

 

Set Clock Mode and Time Zone OSD

 

– Initially highlighted: Clock Mode : Auto, Time Zone : 

South and Southeast 

 

– If the TV will be tuned to digital broadcast channels, and 

these channels transmit date and time information, set 

the Clock Mode to Auto. The TV will set the date and 

time automatically.

 

– If the TV will not be tuned to digital broadcast channels, 

set the Clock Mode to Manual, and then set the date and 

time on the TV manually.

 

– Select your time zone on the map appears. 

 

UI Scenario

TV Controller

The TV’s Controller on the bottom right side of the TV, lets you control the TV without the remote control.

 : Turns the TV on or off.
 / 

 : Changes channels.

 / 

 : Adjusts the volume.

 : Displays and selects the available video sources.

Control Menu

Remote control sensor/TV Controller

 

If you press it first, the control menu appears. You can select the function by pressing and holding the TV’s controller.

 

The product color and shape may vary depending on the model.

 

With the TV’s Controller, you cannot perform other operations except for turning the TV on or off, changing the channel, 

adjusting the volume, and switching the input source.

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to 

decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for 

example). It is best to unplug the power cord.

-02

STOP

Please do not return 

this unit

 

If you are having problems operating this TV, 

Please call;

US: 1-866-894-0524  

CANADA: 1-800-726-7864

 

For web support please visit

http://www.samsung.com/us/business  

5

  

2EA

B

C

x4(M4 X L12)

• Stand

• Guide Stand 

• Screws

 

Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them.

 

Make sure that at least two people lift and move the LED TV. 

 

When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the screws. 

 

The number of screws may differ depending on the model.

!

!

!

C

(M4 X L12)

 x4

!

!

!

1

4

2

5

3

6

B

C

Viewing the Connection Panel

 

The product color and shape may vary depending on the model.

3

HDMI IN 2

(DVI)

4

2

5

6

3

(5V  0.5A

)/CL
ONIN

G

1

AUDIO

AUDIO 

OUT

EX-LINK

HDMI IN 

2 (ARC)

3

HDMI IN 1

(DVI)

HDMI IN 2

(DVI)

2

2

4

(5V  0.5A)

/CLONING

1

AUDIO

AUDIO 

OUT

EX-LINK

HDMI IN 2 

(ARC)

ANT IN

AIR/CABLE

AV IN

AUDI
O

VIDEO

ANT IN

HDMI IN

 

1 (DVI

)

5

6

AV IN

AUDIO

VIDE

O

1

 

AV IN

2

 

USB (5V 0.5A) / CLONING

3

 

HDMI IN 1 (DVI), 2 (ARC) 

4

 

ANT IN

5

 

EX-LINK

6

 

AUDIO 

OUT

3

HDMI IN 2

(DVI)

4

2

5

6

3

(5V  0.5A

)/CL
ONIN

G

1

AUDIO

AUDIO 

OUT

EX-LINK

HDMI IN 

2 (ARC)

3

HDMI IN 1

(DVI)

HDMI IN 2

(DVI)

2

2

4

(5V  0.5A)

/CLONING

1

AUDIO

AUDIO 

OUT

EX-LINK

HDMI IN 2 

(ARC)

ANT IN

AIR/CABLE

AV IN

AUDI
O

VIDEO

ANT IN

HDMI IN

 

1 (DVI

)

5

6

AV IN

AUDIO

VIDE

O

 

1

 

USB (5V 0.5A) / CLONING

2

 

HDMI IN 1 (DVI), 2 (ARC)

3

 

AV IN

4

 

AUDIO 

OUT

5

 

EX-LINK

6

  

ANT IN

 

AIR/CABLE

When in Hotel mode (Interactive or Standalone), all Channel menu items in the Menu OSD except for the Channel List 

are deactivated. If you need to change the channel line up, use the Channel Setup item in the Hotel options menu.

Notice

Sound Bar

 

Samsung Sound-Bars and Hotel TVs in 2016

1.  Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung 

Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV’s sound through 

the Sound-Bar.

2.  The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV is 

turned on.

 

– If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned on.

 

– If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.

3.  Models supporting the ARC function are listed below:

 

– Sound-Bars: HW-E350/E450/E550

HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F75

 

Setting the Sound-Bar to Hotel Mode.

4.  Set the following Hotel menu options:

 

– Hotel option > System > Sound Bar Out = On.

 

– Hotel option > Power On > Power On Volume = User Defined.

 

– Hotel option > Power On > Power On Volume Num > Set greater than 0.

 

– Hotel option > Power On > Max Volume > Set greater than 0.

5.  Connect an HDMI cable from the HDMI OUT jack at the back of the Sound-Bar to the HDMI2 port (supporting ARC) on the 

hospitality TV.

6.  After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV, 

and then automatically switches to Hotel Mode.

Sound Bar Hotel mode functional characteristics:

 

– Power On/Off is synchronized with the TV

 

– HDMI_CEC defaults to On

 

– Functions through the “HDMI OUT” port only

 

– Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes.

 

– Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power On Volume and 

Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV’s Hotel options menu.

Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and Max Volume=45.

 

HG40NE460

Wall mount 

Adapter

HG32NE460

HG40NE460

A

1EA

If you select TV Basic 

Setup or Commercial 

TV Mode

if you 

select 

Factory 

Menu

Select your language

Press Power OFF to exit.

complete setup and use your 

TV if you select Commercial TV 

Mode before

If you select TV Reset, the TV resets all 

values to their factory defaults and then 

displays the Hospital Plug & Play menu. 

Go to the first Hospital Plug & Play 

screen below.

Region Settings

NONE

US

KOR

SD_MEXICO

SD_CANADA

Country List

USA

Change the region settings if you are located in North 

America, Latin America, or Europe. Your TV might not function if the

region settings are not correctly congigured. When the region 

settings are changed, your TV will automatically restart to apply them.

c

TV Installation Type

TV Basic Setup
Cloning Mode
Factory Menu
Commercial TV Mode

Start basic setup to use

your TV.

Select your TV installation type.

c

Select Solution

Standalone (Home Menu)
LYNK REACH
Interactive (STB)

Select if you do not want

to connect to a specific

solution and only want 

to use the TV.

Select a solution to install on your TV.

c

Clone Settings 

Clone system settings from a USB flash drive to your TV. Skip this step if you want to clone system 

settings from a server.

A USB flash drive is mot connected. Please check and try again.

Clone from USB

Solution Setup

Room Number
Group                                              All

Group ID

Enter The room number.

Only numbers and 

English letters can be

entered.

Set options regarding the selected solution.

Setup Complete!

Your TV is now ready to use.

Done

Select your Language

Select your language to start the on screen setup. 

Press the arrow buttons 

to move around the

screen.

Press the Enter button to

select.

English
Español
Français

age

Press the arrow

buttons

c

Auto Program

Auto Program complete.
156 channels are memorized

Change Settings

Scan Again

DTV Air

0

Air
DTV Cable

Cable

12
82

62

Select the channel 

band to use for Auto 

Program

After Searching 

channels.

Auto Program

Antenna 

   

         Both

Digtal Cable System 

          STD

Analog Cable System 

          STD

Select current connected 

antenna.

To get channels, set the options below then select 

Scan.

Scan

Auto Program

Auto Program is 

 channels for you...

Air 21 

 

 

6%

Stop

DTV Air

0

Air
DTV Cable

Cable

0
0

0

Select Clock Mode, DST, and your Time Zone

Select Picture mode

Configure your TV

Picture Mode    

         Standard

Choose a picture mode

that best suits your

viewing enviroment.

Select your information in all of the categories 

below.

Setup Complete!

Your TV is now ready to use.

Done

Clock

-- : -- --

Select whether to apply daylight saving time

Set current date and time

Clock settings

Auto

Date

-- / -- / ----

Time

-- : -- --

DST

Off

Time Zone

Eastern

Standalone 

Hospitality Option Menu

appears.

Self Diagnosis for TV
Self Diagnosis for HTV
SW Update
Service Pattern
ATV cable AGC Gain

OFF

DTV OpenCable AGC Gain
Sound Bar Out

OFF

Contact Samsung
Standby LED

ON

Default

Default

TV Reset

if you choose 

Cloning Mode

if you choose 

Standalone or 

Interactive

Complete cloning and next

if you choose 

LYNK REACH

P

HE460_ZX_QSG_BN68-07996M-02_L02.indd   1

2016-06-07   오후 3:27:19

Отзывы: