48
English
Securing the TV to the Wall
Caution
: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do
not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow
all safety precautions provided in the included Safety Flyer. For added stability, install the anti-fall device for safety
purposes, as follows.
To avoid the TV falling
1.
Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly
installed in the wall.
✎
Depending on the type of wall, you may require additional hardware, such as an anchor.
✎
As the necessary clamps, screws, and string are not supplied, please purchase these additionally.
2.
Remove the screws from the center of the back of the TV, put the screws into the clamps, and then fasten the screws
onto the TV again.
✎
Screws may not be supplied with the product. In this case, please purchase screws with the following
specifications.
3.
Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string
tightly.
✎
NOTE
y
Install the TV close to the wall so that it does not fall backwards.
y
It is safe to connect the string so that the clamps fixed on the wall are parallel to or lower than the clamps fixed
on the TV.
y
Untie the string before moving the TV.
4.
Verify that all connections are properly secured. Periodically check connections for any sign of fatigue to protect
against failure. If you have any doubt about the security of your connections, contact a professional installer.
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to
physically fix the system when using it in a public place. The appearance
and locking method may differ from the illustration, depending on the
manufacturer. Refer to the manual provided with the Kensington Lock for
additional information on its proper use.
To lock the product, follow these steps:
Please find the “
K
” icon on the rear of the TV. A kensington slot is beside
the “
K
” icon.
1.
Wrap the Kensington lock cable around a large, stationary object such
as a desk or a chair.
1
<Optional>
2.
Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3.
Insert the locking device into the Kensington slot on the product (
1
).
4.
Lock the lock.
✎
These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎
The locking device must be purchased separately.
✎
The location of the Kensington Lock may differ depending on the model.
