55
English
Multi Code Remocon
The Multi Code Remote Control is a special transmitter that can control multiple TVs with one remote.
This function is useful in environments where there is more than one TV in one location, such as hospitals. The Set ID
number will be displayed in the source OSD. It is possible to support up to 9 different remote key transmissions for multi
code.
The initial ID code for each TV is “0”.
The ID code can be set and reset in Analog TV mode or PC mode. (not available in TTX or DTV channels)
−
The ID code can be from 0 to 9.
−
Press and hold the
RETURN
+
MUTE
keys for longer than 7 seconds, and then press the digit key you want to set.
−
The Set ID OSD will be displayed in a central position.
−
The following text will be displayed. “Remote control code is set to X. If you want to change the Remote control
code, enter the chosen digit.” (x is the digit number) This OSD will be displayed until the exit key is pressed.
Remote control code is set to 0. If you want
to change the Remote control code, enter the
chosen digit.
−
For example, the TV and Remote control will be set to ID code #1 if the user presses #1.
−
The following text will be displayed: “Remote control code is changed to 1”. The TV can then only be controlled
by a remote control with the same ID code as the TV.
−
If the ID code between the remote control and the TV does not match, the following text will be displayed:
“ TV ID x” (x is the TV’s ID)
−
To reset the ID code, press and hold the
EXIT
+
MUTE
keys for longer than 7 seconds. The ID codes of both the TV
and Remote control will be reset to “0”. “Remote control code is set to 0.” will be displayed.
−
The way to set or reset the ID may differ depending on the remote control. See the table below.
Setting the Time
O
MENU
m
→
System
→
Time
→
Clock
→
Clock Set
y
The time is entered
−
Press the remote control button to select
Clock
and set up the time.
Time
Clock
Sleep Timer
Wake-up Timer
Off
y
Setting the Interactive Mode Time
−
If the Hotel System transmits the time information, the time is set
automatically.
−
If the Hotel System does not transmit the time information, the time
cannot be displayed.
Clock
y
Clock Set
Clock Mode
y
Time Zone
Manual
Auto
✎
If the time is set, the clock will be displayed on the front panel.
