23
English
Setting the Hotel Option Data
To Enter: Press the
MUTE
→
1
→
1
→
9
→
ENTER
E
buttons in order. (From the Hospitality mode, the Standalone mode is set.)
To Exit from this menu : power off and turn on again.
✎
Depending on Model and Region, some menus do not exist on the TV set.
Hotel TV Function
Description
Category
Item
Initial value
Hospitality
Mode
Hospitality Mode Standalone
Select Hospitality mode.
•
Interactive mode : TV works with an SI STB or SBB.
•
Standalone mode : TV works alone, without an SI STB or SBB.
SI Vendor
SI Vendor
OFF
•
Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /
Seachange / MDC / Innvne
•
Standalone mode : Smoovie
Power On
Power On Channel Last Saved
Set the default values that will be applied when the TV is turned on.
•
User Defined : Lets you set Power On Channel and Channel Type manually. See Power On
Channel and Channel Type below.
•
Last Saved : If you select this item, when the TV is turned on, it displays the channel it was
displaying when it was turned off.
Power On Channel
Num
1
When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type
ATV
Select channel band : AIR (analogue air band), DTV (digital air band), CATV (analogue cable
band), CDTV (digital cable band)
Power On Volume Last Saved
•
User Defined : Lets you set the Power On Volume manually. See Power On Volume below.
•
Last Saved : When the TV is turned on, it returns to the volume that had been set when the
power had been turned off.
Power On Volume
Num
10
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume
0
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Max Volume
100
The maximum Volume Level the user can set in Stand Alone Hospitality mode.
Power On Source
TV
Select the input source the TV displays when turns on.
Power On Option
Last
Option
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
•
Last Option : Returns to its last Power state. If it was in Stand-by, it returns to Stand-by. If
it was on, it turns on.
•
Power On : When the power returns, the TV turns on.
•
Standby : When the power returns, the TV enters the Standby mode.
Channel
Channel Setup
Gives you direct, immediate access to some of the Channel menu functions on the user
Channel menu such as Auto Tuning, Antenna selection, etc.
Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel
Editor you can:
•
Change the channel numbers and names, and sort the channels in your desired channel
number order.
•
Apply the video mute to channels you select. The video mute blanks out the video from a
channel and outputs only the sound while displaying a speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily, without your
having to display each channel directly.
Mixed Channel
Map
ON
This Feature enables showing/browsing all antenna type (Air/Cable or Satellite) channels at
the same time.
•
ON: When ON, guests can access the complete Channel Map irrespective of the selected
antenna type. The Channel list will also populate Air as well Cable type channels.
•
OFF: When OFF, guest can access the Channel Map corresponding to the selected
antenna type [AIR/CABLE or Satellite] only. The Channel list/Editor will only show the
selected antenna type channels.
Dynamic SI
OFF
•
ON : Check the DTV Programme channel number. (the TV channel editor is inaccessible)
•
OFF: Do not check the DTV Programme channel number.
(the DTV channel editor is accessible, but additional channel Programme number update is
not supported)
Channel Rescan
Message
ON
When there is a mismatch between the data in the channel map and the transmitted data ,
the TV autotunes the channels to restore the data/parameters in the channel map.
•
ON: When Channel Rescan Message is ON, The OSD showing that the channels are being
rescanned will be displayed to Hotel Guests.
•
OFF: A Hotel Admin can turn the Channel Rescan Message OFF, if the rescan message
OSD should not to be displayed to Hotel Guests.
