26
English
¦
Cloning
USB Cloning is used to download user-configured settings (
Picture, Sound, Input, Channel, Setup
, and
Hotel Setup
) from
one TV set and upload them to other TV sets.
All the user-defined settings from the TV (Master Set) can be copied to the USB device.
y
Cloning from TV to USB
: It is an operation to copy the stored data from the specific area
on the EEPROM from the TV set to the USB device.
1.
Insert a USB drive into the USB port on the rear of the TV.
2.
Enter Hotel Option by pressing buttons in order.
x
MUTE
→
1
→
1
→
9
→
ENTER
3.
Press the
▲
or
▼
button to select “Clone TV to USB”, then press the
ENTER
button.
4.
The message “Clone TV to USB” is displayed, then press the
ENTER
button.
5.
You can Make sure USB cloning behavior.
x
In Progress
: during copying data to USB.
x
Completed
: copy operation was finished successfully.
x
Failed
: copy operation was not finished successfully.
x
No USB
: any USB is not connected.
y
Cloning from USB to TV
: It is an operation to download the stored data in USB device to
TV set.
1.
Insert a USB drive into the USB port on the rear of the TV.
2.
Enter Hotel Option by pressing buttons in order:
MUTE
→
1
→
1
→
9
→
ENTER
3.
Press the
▲
or
▼
button to select “Clone USB to TV”, and then press the
ENTER
button.
4.
The message “Clone USB to TV” is displayed, then press the
ENTER
button.
5.
You can Make sure USB cloning behavior.
x
In Progress
: during copying data to TV.
x
Completed
: copy operation was finished successfully.
x
Failed
: copy operation was not finished successfully.
x
No USB
: any USB is not connected.
x
No File
: there is no file to copy on the USB.
✎
The operation to copy from USB to TV can be executed by pressing
ENTER
key for 5 seconds.
✎
The
CLONE
function only supports the same model series. (It does not work properly for different model series.)
For fast instant cloning during installation!
Insert USB key with master settings from first TV and press Enter key for 5 seconds.
Pre-condition for cloning (check point)
–
Cloning should be done between same model (same version).
–
Before cloning, all displays should be updated at the latest version (same version).
CABLE
(5V 0.5A) /
CLONING
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
