Samsung HG28NC690, Руководство по установке

Страница: 23 / 53

23
English
¦ Menu Items
To Enter this menu: Press the MUTE
→
1
→
1
→
9
→
ENTER buttons in order.
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Hotel TV Function
Description
Category Item initial value
Hospitality Mode Hospitality Mode Standalone
Select Hospitality mode.
• Interactive mode : TV works with an SI STB or SBB.
• Standalone mode : TV works alone, without an SI STB or SBB.
SI Vendor SI Vendor OFF
• Interactive mode : Samsung / OCC / MTI / Nstreams / NXTV / Enseo / Cardi-
nal / Guestek / Seachange / EBL
• Standalone mode : OFF / Smoovie
Power On
Power On Channel Last Saved
Set the default values that will be applied when the TV is turned.
• User Defined : Lets you set Power On Channel and Channel Type manually.
See Power On Channel and Channel Type below.
• Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel
Num
… When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type
…
• Select channel band : AIR (analog air band), DTV (digital air band), CATV
(analog cable band), CDTV (digital cable band).
Power On Volume Last Saved
• User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
• Last Saved : When the TV is turned on, it returns to the volume that had been
set when the power had been turned off.
Power On Volume
Num
… The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume 0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Max Volume 100 The maximum Volume Level the user in Stand Alone Hospitality mode.
Power On Source TV Select the input source the TV displays when turns on.
Power On Option Last Option
Determines the TV's state when power returns after a power failure or after you
have unplugged the TV and then plugged it in again.
• LAST OPT : Returns to its last Power state. If it was in Stand-by, it returns to
Standby. If it was on, it turns on.
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Channel
Channel Setup …
Gives you direct, immediate access to some of the Channel menu functions on
the user Channel menu such as Auto Program, Antenna selection, etc.
Channel Editor …
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your
desired channel number order.
• Apply the video mute to channels you select. The video mute blanks out
the video from a channel and outputs only the sound while displaying a
speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily,
without your having to display each channel directly.
Channel Bank
Editor
If you set Hospitality Mode to Standalone and SI Vendor to Smoovie, this item is
displayed. Lets you edit the channel bank that works with the Smoovie Remote.
Refer to page 38.
Dynamic SI OFF
• On : Check the DTV Program channel number. (If Dynamic SI is On, it is
not availale to edit DTV channels in Channel Editor.)
• Off : Does not check the DTV Program channel number. (If Dynamic SI
is Off, it is available to edit DTV channels in Channel Editor,but additional
DTV channel program number update is not supported.)
[HC690_ZA]Install_Guide_00ENG.indd 23 2014-03-21 1:25:49